Installation Guide & Warranty Model Number | H20J55DT HealthViewTM TV Table of Contents see page 5 Master TV Setup see page 7 Zenith and the lightning Z logo are registered trademarks of Zenith Electronics Corporation © Copyright 2007, LG Electronics U.S.A., Inc.
For Customer Support/Service, please call: 1-888-865-3026 www.lgcommercial.com • www.zenith.com RECORD THE H20J55DT SERIALNUMBER The serial number of the HealthView T M TV is located on the back of the cabinet. For future reference, we suggest that you record the number here: Serial No.____________________________ WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
IMPORTANT SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS • • • • Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Installation Guide & Warranty Model Number | H20J54DT HealthView TV 1. Do not use this apparatus near water. 2. Clean only with a dry cloth. 3. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. stoves, or other apparatus (including amplifiers) that produce heat. 5.
IMPORTANT SAFETY INSTRUCTIONS 8. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over. PORTABLE CART WARNING 9. Unplug this apparatus during lightning storms or when unused for long periods of time. 10. Refer all servicing to qualified service personnel.
Table of Contents Use this page as a reference for finding the pages or sections to go to and set up the TV’s features for the end user See the Master TV Setup on page 7 This TV functions differently than previous Zenith hospital sets. A Master TV setup must be created and then transferred to the internal TV controller with 2-5-5+Menu. This action will transfer all digital information and add important analog information to the TV controller. Safety Warnings . . . . . . . . . . . . . . . . . . . . .
TV Features Overview A brief overview of the features on this TV Analog/Digital Tuner This TV is equipped with an analog/digital tuner. This tuner is used for standard over-the-air antenna, cable type (CATV) and is capable of receiving over-the-air and cable type (CADTV) digital programming.
H20J55DT Master TV Setup A Master TV must be created and then transferred to the internal TV controller with 2-5-5+Menu, this action adds to the TV controller important analog setup information and all digital information. (Please refer to the sections mentioned below for more detailed instructions). Note: This TV is capable of storing in memory up to 140 digital broadcast and 125 analog channels. Overview: Master TV Setup Procedure Following are the steps necessary for setting up a Master TV.
Hook Up an Off Air Antenna Connect an over the air signal source to the TV Over-the-Air Antenna 1 Locate the Antenna/Cable jack on the back of the TV. 2 Connect the RF antenna wire that run from the wall directly to the jack, according to the connection diagram shown to the right. If you have a 75 ohm RF cable, then you donÌt need any adapters! A 300 to 75 ohm adapter is not included with the Zenith TV. Typical TV Back Antenna Antenna Cable TV SPEAKER M.P.I.
Hook Up Cable Service (CATV) Connect cable service to the TV Cable Service 1 Locate the RF jack on the back of the TV set. 2 Connect the CATV cable that runs from the wall to the Antenna/Cable RF jack as shown to the right. Typical TV Back Cable TV Wall Jack Antenna Cable TV SPEAKER RF Coaxial Wire (75 ohm) M.P.I. VIDEO IN SPEAKER OUT PILLOW SPEAKER AUDIO IN Cable Service with a Cable Box 1 Locate the Antenna/Cable in jack on the back of the TV set.
Hook Up an Off Air Antenna with VCR Connect an over-the-air signal source to the VCR and TV Over-the-Air Antenna with VCR 1 Locate the Antenna/Cable In jack on the back of the VCR. 2 Connect the antenna that runs from the wall jack directly to this jack, according to the connection diagram shown to the right. 3 Make the VCR to TV connections as indicated in the illustration.
Hook Up a Cable Box with VCR Connect a cable box and VCR to the TV Cable TV Wall Jack Cable Service with VCR 1 Locate the In jacks on the cable box and the VCR. 2 Connect a 75 ohm cable between the cable box wall jack and Cable In on the cable box. 3 Connect a 75 ohm cable from the Cable out jack on the cable box to the Ant In jack on the VCR. 4 Connect a 75 ohm cable between the VCR out jack on the VCR and the Antenna/Cable In jack on the TV.
Hook Up Audio/Composite Video Connect the TV to an audio/composite video source Audio/Composite Video 1 Locate the audio/composite video input jacks on the TV. 2 Connect the audio/composite video input jacks to an audio/composite video device as shown in the illustration. Typical TV Back Composite Audio/Video Device Antenna Cable Left TV SPEAKER M.P.I.
Hook Up an External Speaker Connect the TV to an external speaker or amplifier External Speaker 1 2 Locate the Matrix Out jack on the back of the TV. Connect the Matrix Out jack to an external speaker or audio amplifier as indicated in the illustration. Speaker Back Typical TV Back Audio In Antenna Cable TV SPEAKER M.P.I.
Pillow Speaker Connection & Setup Pillow speaker is not included with the HealthView TV Pillow Speaker Setup 1 Locate the Pillow Speaker output jack on the back of the HealthView TV. 2 Connect an accessory pillow speaker or wired remote control unit to this 6-pin jack. 3 Connect the pillow speaker as shown in the illustration. 4 Set the Pillow Speaker switch to Pillow Speaker setting. Note: Once the switch is set to Pillow Speaker, no audio will be heard from the TV speakers.
Pillow Speaker Setup Connect a pillow speaker to the TV Pillow Speaker Control Pillow Speaker Interface This connector furnishes three control lines and an audio output. A patient-pendant remote control, or entertainment audio and nurse call system may be connected here. All lines are isolated from the AC power line and earth ground. (Opto-isolators isolate the control lines, and a transformer isolates the audio. There are no relays or inductive components in the control lines.) Pin No.
Optional Installer/User Remote Control Keys descriptions and functions for the optional remote MUTE Turns sound Off and On, while the picture remains. CHANNEL PREVIEW* Allows Parental Control access on analog channels: set V-Chip blocks for analog/digital programming. BANK Selects channel banks 1-2-3-4. POWER Turns TV On or Off. GUIDE Not functional. MUTE POWER CH BANK PREVIEW GUIDE INFO SAP SAP Chooses other digital audio languages if available from broadcaster.
Front Panel Controls Using the front panel controls to operate the TV 1 Power Turns TV on and off. 2 Channel (Down/Up) Chooses next available channel. 3 Volume (Down/Up) Decreases/increases sound level. 4 CC (Captions/Text) Turns selected caption/text option On and Off. (Depending on TV captions setup.) 5 power 6 channel 7 volume 8 captions Install Batteries into Remote Control AA AA - + + Remove the back of the remote control and install two high-quality AA batteries.
On-Screen Menus/Displays Overview Descriptions of the menus and on-screen status displays Using MENU and the other keys indicated on the optional Installer’s remote, the installer can access the menus/displays described below.
Other Menus and On-Screen Displays Press the remote keys indicated below to access these menus and displays CHANNEL PREVIEW Ch 25 - PBS 7:15 PM MONO VOLUME XDS Information As Available LENGTH 00:32 TIME LEFT 00:42 5 9 20 32 ------------- AUX - - - 2 ---CH TO SELECT, ENTER TO QUIT CC FOR PARENTAL CONTROL Volume Display Press VOLUME. Shows current sound level. Channel/Time/Audio Display Ch Preview Menu Press ENTER.
Auto Program (Channel Search) SETUP MENU 1 Using the optional Installer’s remote control, press POWER to turn the TV on. 2 Press MENU repeatedly until the Setup menu appears. 3 Use Up or Down ADJ on the remote control to highlight Auto Program on the menu. 4 5 TO PROGRAM AUTO PROGRAM ADD/DEL/BLNK CH. LABELS CLOCK SET TIMER CAPTIONS AUDIO LANG. LANGUAGE MUTE POWER CH BANK PREVIEW GUIDE Press the Right or Left ADJ arrow to go to the Autoprogram Menu.
Add/Delete/Blank Feature Fine-tune the channel selection list by blanking certain channels and deleting other unwanted channels. Note: TV can store in memory 140 digital and 125 analog channels per bank. SETUP MENU 1 AUTO PROGRAM ADD/DEL/BLNK CH. LABELS CLOCK SET TIMER CAPTIONS AUDIO LANG. LANGUAGE Use MENU key on optional Installer’s remote to access the Setup menu. 2 Use the Up or Down ADJ key to highlight the 3 Using either the NUMBER keypad and OK or the Add/Del/Blnk option.
Setting Preset Analog Channel Labels Selecting channel names from the preset Channel Labels SETUP MENU 1 Using either the NUMBER keypad or the Channel Up/Down arrows on the optional Installer’s remote, select an analog channel. 2 Press MENU repeatedly on the optional Installer’s remote until the Setup menu appears. 3 Choose the Ch Labels option using the Up or Down ADJ arrow. 4 5 AUTO PROGRAM ADD/DEL/BLNK CH. LABELS CLOCK SET TIMER CAPTIONS AUDIO LANG.
Analog Preset Channel Labels Typical Analog preset Channel Label options A&E DISC MAX TMC ABC E! ME/U TNN ACTS ENC MMT TNT ADC ESPN MTV TRAV AMC ESP2 NBC TSN BCC ET NICK TVA BET EWTN NOS TWC BRAV FAM PBS UPN CA FNN PLAY USA CBC FOX PTL UC CBN F&V QVC VCR CBS FX RDS VH-1 CMTV GALA REQ VISN CNBC HBO SC VJN CNN HN SCFI WB COM HSE SHOW WGN CSPN HSN SIN WTBS CSP2 IC TBS WWOR CTN INSP TBN YTV CTV JCN TELE DIS LIFE TLC 206-4065 Pag
Setting Custom Labels for Digital Channels Setting channel names for Channel Labels SETUP MENU 1 AUTO PROGRAM ADD/DEL/BLNK CH. LABELS CLOCK SET TIMER CAPTIONS AUDIO LANG. LANGUAGE Using either the NUMBER keypad or the Channel Up/Down arrows on the optional Installer’s remote, select a digital channel. 2 Press MENU repeatedly on the optional Installer’s remote until the Setup menu appears. 3 Choose the Ch Labels option using the Up or Down ADJ arrow.
Clock Setup (Auto or Manual) Have the TV set the clock time or use Manual Clock Set SETUP MENU AUTO PROGRAM ADD/DEL/BLNK CH. LABELS CLOCK SET TIMER CAPTIONS AUDIO LANG. LANGUAGE TO SET CLOCK CLOCK MENU CLOCK SET TIME ZONE DAY. SAVING USE ADJ USE ADJ SETUP MENU AUTO PROGRAM ADD/DEL/BLNK CH. LABELS CLOCK SET TIMER CAPTIONS AUDIO LANG.
On-Off Timers Setup Set up On/Off Timers Note: On/Off Timers operate independently SETUP MENU AUTO PROGRAM ADD/DEL/BLNK CH. LABELS CLOCK SET TIMER CAPTIONS AUDIO LANG. LANGUAGE 1 TIMER ON TIME 9:00 AM TIMER OFF TIME 7:00 PM TIMER TO SET TIMER On the optional Installer’s remote, press MENU repeatedly until the Setup menu appears. 2 Use Up or Down ADJ to highlight the Timer option then press the Left or Right ADJ arrow. 3 Use Up or Down ADJ to choose an option.
Captions: Analog-Digital (Caption/Text) Setup Overview Set up Closed Caption/Text options for the end user Analog-Digital Closed Captions/Text Overview, End-user Setup The caption/text feature is designed to be available to the end user on either an analog or digital channel. For the end user to get analog captions, all the user needs to do is press CC on the remote and select On - - same for digital channels, select On and pick a language.
Captions: Analog-Digital Menu Structures Review Analog and Digital Captions options available Note: Digital captions are only available on some digital channels. Analog Captions Menu Structure SETUP MENU AUTO PROGRAM ADD/DEL/BLNK CH. LABELS SOURCE NAME CLOCK SET TIMER CAPTIONS LANGUAGE CAPTION SETUP OPER. MODE SEL.
Audio Language for Digital Channels Choose English, Spanish (Español), or French (Francais) for Digital channels Default Audio: If you select an alternate language, the TV tries to find it. If the alternate language is not available, the TV audio will be the default audio from the program. Typically, if you select Spanish and it is not available, English will be heard. SETUP MENU 1 On the optional Installer’s remote, press MENU repeatedly until the Setup menu appears.
Language for the On-Screen Menus Choose English, Spanish (Español) or French (Francais) for the on-screen menus. SETUP MENU 1 On the optional Installer’s remote, press MENU repeatedly until the Setup menu appears. 2 Use Up or Down ADJ arrow on the remote control to highlight the Language option on the menu. 3 Use the Left or Right ADJ arrow to choose one of the following options: • English • Spanish (Español) • French (Francais) 4 AUTO PROGRAM ADD/DEL/BLNK CH.
Alarm Menu Use the Alarm menu to set a time for the TV to automatically turn itself On ALARM MENU TIME NOW 1 Press Alarm on remote control. the optional 6:10 3:11 AM PM TIMER PRESS DIGITS TO SET TIME TIMER TO SELECT AM/PM 2 Using the NUMBER keypad, set the time you want the TV to turn On. For example, to set 7:30 AM, key in 0, 7, 3, 0. 3 Use TIMER to choose AM or PM, as shown on the menu. 4 MUTE POWER CH BANK PREVIEW GUIDE Press OK to remove menu from screen.
Video Menu Use the Video Menu to customize the picture’s appearance 1 On the optional installer’s remote, press the MENU key repeatedly until the Video menu appears. Your options are: V I DE O ME NU CONTRAST BRIGHTNESS COLOR TINT SHARPNESS PICTURE PREF • Contrast: Adjusts the level of difference between white and black in the TV picture. The more contrast, the brighter the picture appears. CUSTOM Analog Channel Display • Brightness: Increases or decreases amount of white in the TV picture.
SAP: Additional Digital Audio Program Selection SAP can be used to select other additional digital audio programs, if available. 5:50 PM DTV 66-1 News and local programming Thu Jan 19, 2007 4:00 PM Multi-lingual 16:9 Dolby Digital 6:00 PM 1080i HD TV-PG Indicates the broadcast may have additional audio programs available. MUTE Note: The broadcaster has control of any additional audio programs available.
Parental Control Menu Overview Use V-Chip to restrict undesirable programming This feature can “block” undesirable programming from appearing on the TV. Set restrictions using Age Block for all programming, TV and movies. Overview Parental Control offers the user a wide variety of options and settings that restrict or “block” the programming that can appear on the TV.
Installer Menu Options For V-Chip Operation V-Chip functionality can be disabled if the password is not known Reset Parental Control Block Hours to Zero and Cancel Password This provides the institution staff and the installer a means to reset the TV to normal operation; if a user has either forgotten the password or has left Parental Control blocks active. (Installer Menu item 0-I Installer Seq must be set to 0 for this to work.
Parental Control Menu After you have read the preceding page, follow instructions below to set up and activate Parental Control 1 Unblocked Blocked US Ratings Advanced Ratings DTV RATINGS TO BLOCK Unblocked G and Above PG and Above PG-13 and Above R and Above NC-17 and Above X Unblocked TV-G and Above TV-PG and Above TV-14 and Above TV-MA Unblocked TV-Y and Above TV-Y7 General Children Dialog Language Sex Scenes Violence F Violence No Rating 00 Hours Unblocked TV-PG and Above TV-14 and Above TV-MA
Parental Control TV/Movie Rating Guidelines TV Parental Guidelines Rating System TV-G General Audience Considered suitable for all audiences; children may watch unattended. TV-PG Parental Guidance Suggested Unsuitable for younger children, may contain: Suggestive Dialog, Foul Language, Sex and Violence Scenes. TV-14 Parents Strongly Cautioned Unsuitable for children under 14, may contain: Strong Dialog, Foul Language, Sex and Violence Scenes.
Parental Control Menu / Digital Channels Parental Control for Digital Channels Advanced Rating To access DTV parental control, first tune in a digital channel. On the menu select DTV Ratings. To use parental control, select Advanced Ratings and use Vol Up to enable the Advanced Parental Lock option. Block Digital Channels using US Ratings Information message For blocking digital channels using US ratings select US Ratings and press Vol Up.
Channel Banks Setup Use the Channel Banks to customize the channel offerings to the end user The TV has four channel banks, where the administrator or installer can store groups of TV channels. Note: Channel banks set up requires an installer’s remote with “Source” or “Bank” keys. Planning The Channel Banks Generally, TV channels are grouped into “program packages” with terms that are proposed to the end user. The user then opts for a package. Below is an example of how TV channels may be grouped. Bank 2.
Channel Banks Setup Use the Channel Banks to control the channels available to the end user. Each channel bank is capable of storing up to 140 broadcast digital plus 125 analog channels. Note: The prudent installer should delete all un-necessary channels such as channels that have audio only or do not carry viewing material suitable for the end user. Figure 1.
Channel Banks Setup Use the Channel Banks form below to plan your program packages Date _____________ Installer __________________________________ PLAN YOUR CHANNEL BANKS BY FILLING IN THESE CHARTS B Purpose A N K (or use photocopies) Channel Number 1 2 3 4 5 6 7 8 9 10 11 1 2 13 14 15 16 17 18 19 2 0 21 22 23 24 2 5 1 2 3 4 B A N K Purpose Chann el Number 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 1 2 3 4 B A N K Purpose Chann el Number 51 52 53 54 55 56 5
Installer Menu Use the Installer Menu to set up or change operational settings. See detailed descriptions of the Installer Menu items on the following pages Installer menu items can be accessed by using the optional installer’s remote control. Just press and hold MENU (about 8 seconds) until the menu disappears, then press 9, 8, 7, 6, then OK (Enter). To remove the Installer’s Menu, press OK repeatedly. Any changes you make will be stored in nonvolatile memory. The Installer menu opens with the main menu.
Installer Menu Installer Menu Items 24-I through 61-I Menu Function Item Value Range Default Value 24-I. TEXT MODE 25-I. NOT USED 26-I. NOT USED 27-I. HOSPITAL MODE 0-2 2 Leave default set to 2. 28-I. CH OVER RIDE 0/1 1 When set to 0, limits direct access to only favorite channels and locks out Auto Program function. 29-I. OLD OCV 0/1 0 30-I. ACK MASK 0/1 0 M.P.I. communication parameter. 31-I. POLL RATE 20 - 169 94 M.P.I. communication parameter. 32-I.
Installer Menu Installer Menu Items 62-I through 88-I Menu Function Item Value Range Default Value Brief Description of Function and Comments 62-I. BCK VIDEO M 0-7 7 Custom background color for the Video menu. 63-I. EN PTL COL 0/1 0 Set to 1 to enable custom color for the V-Chip (Parental Control) menu. 64-I. FOR PTL M 0-7 6 Custom foreground color for the V-Chip (Parental Control) menu. 65-I. BCK PTL M 0-7 4 Custom background color for the V-Chip (Parental Control) menu. 66-I.
Installer Menu Installer Menu Items 89-I through 117-I Menu Function Item Value Range Default Value Brief Description of Function and Comments 89-I. POKE ENABLE 0/1 0 If set to 1, writing to Non - volatile memory through *M.P.I. is enabled. 90-I. KEY LOCK 0/1 0 If set to 1, front keyboard functionality is disabled. 91-I. NOT USED 92-I. NOT USED 93-I. NOT USED 94-I. NOT USED 95-I. NOT USED 96-I. NOT USED 97-I. NOT USED 98-I. NOT USED 99-I. NOT USED 102-I.
Installer Menu Detailed Descriptions for Installer Menu Items 2-I through 9-I 2-I. AC ON (AC Power Switchable) (default). Generally, this feature is used in con- Allows the TV to turn ON just by applying AC junction with START CHANNEL (item 4-I.) where power. Pressing the POWER button is not neces- the start channel may, for example, be set to 3 or sary. This is desirable if the TV is plugged into a 4.
Installer Menu Detailed Descriptions for Installer Menu Items 10-I through 27-I Change values with ADJ (Adjust) Left/Right keys. It may be best to set the same value on every TV. Note: The maximum volume level cannot have a value setting lower than the MIN VOLUME level (See Item 8 -I). 19-I. NOT USED 20-I. FEATURE LEVEL Default set to ZEN 1 for Zenith IR remote control operation. Set O, P LBL for Zenith Private Label IR remote control operation. 10-I.
Installer Menu Detailed Descriptions for Installer Menu Items 28-I through 56-I 28-I. CH. OVER RIDE (Channel Override) 47-I. AUX STATUS If set to 1, the user can select channels with Set to 1 for M.P.I. AUX source to be reported as a either Channel Up/Down or by direct keypad entry. channel number instead of channel 0. Set to 0 to If set to 0, only those channels that are entered disable AUX identification change. for scanning may be selected by direct keypad entry.
Installer Menu Detailed Descriptions for Installer Menu Items 60-I through 76-I 60-I. EN VIDEO COL (Enable Video Menu Color) 70-I. FOR CH-T COL (Channel-Time Display Set to 1 to enable custom color settings for the Foreground Color) Video menu. Set to 0 to disable custom color settings for the Video menu. 61-I.
Installer Menu Detailed Descriptions for Installer Menu Items 77-I through 101-I 77-I. QUICK SHUTOFF 85-I. NOT USED Allows TV power Off event to be controlled by the pillow speaker channel selection button. User would press and hold channel button down for time required to have TV turn Off. Value Range 86-I. NOT USED 0-17, each number represents 1/2 second. For example, if set to 4, TV would turn Off if user held speaker channel button down for 2 seconds. 87-I. NOT USED 78-I. UPN MSB 88-I.
Installer Menu Detailed Descriptions for Installer Menu Items 102-I through 117-I 102-I. ATSC BAND. Sets digital tuning band, there are 5 possible settings for this option. 0 = Broadcast 1 = CATV 2 = HRC 3 = ICC 4 = Follows item 3-I 103-I. ATSC TUNE MD. Sets ATSC tuning mode. 0 = Virtual channel 1 = Physical channel 104-I. STRT MINOR CH (Start Minor Channel) Sets the starting minor digital channel number. For NTSC set at 0. If not 0, sets digital minor start channel number.
LT2002 QuickSet Clone Programmer Use the QuickSet II “Clone” Programmer to copy the setup from a “master” TV then quickly transfer the setup to duplicate TV's; must be the same model number as the master TV. THE CLONE HAS CONTROL OF THE TV THE CLONE IS VERSION THE TV IS VERSION THE SW IS REVISION CLONE CLOCK TV CLOCK = = XX XX XX XX:XX XX:XX - PRESS ANY KEY TO CONTINUE. - DISCONNECT CLONE WHEN DONE.
LT2002 QuickSet Programmer Cloning Preparations Before You Begin Cloning... • Only use one MPI port for connecting to MPI equipment. • Do not run Auto Program while TV is connected to clone programmer. • The “master TV” should be connected to a good, stable signal from an overthe-air antenna or cable service and turned on. • Teaching and Learning is only possible between identical model Zenith TV's. (However, the Clone programmer can store 3 different master TV setups.
LT2002 QuickSet Programmer Cloning CLONE SELECTION MENU THE CLONE HAS CONTROL OF THE TV THE CLONE IS VERSION THE TV IS VERSION THE SW IS REVISION CLONE CLOCK TV CLOCK = = XX XX XX (1) LEARN FROM TV (2) TEACH TO TV (3) SET CLONE CLOCK FROM TV (4) SET TV CLOCK FROM CLONE (5) DISPLAY TV SETUP (6) DISPLAY CLONE SETUP XX:XX XX:XX - PRESS ANY KEY TO CONTINUE. - DISCONNECT CLONE WHEN DONE. C.
LT2002 Clone Programmer Clone Operation Notes Disconnect the Clone from the TV when you are The LT2002 programmer is designed to be used finished; automatically switching it off. The real- with TV's containing the 221-01006 and later time clock continues to run after the main circuits processors. Use with earlier TV sets may give are switched off. unpredictable results.
Troubleshooting Some Quick and Easy Tips for Resolving Problems Installer Menu Settings and TV Problems Installer menu item settings dictate how the TV functions. If a feature is not available or a problem can not be solved, check the installer menu settings to assure feature and functional items are set to appropriate levels, etc. Symptom(s) Possible Cause(s) Possible Solution(s) • AC Power Cord not connected or power outlet doesn’t work. Connect power cord. Try a different power outlet.
Troubleshooting Some Quick and Easy Tips for Resolving Problems Symptoms Possible Cause(s) Possible Solution(s) Page(s) Picture Reception Poor or no picture. Local interference. Poor or no color. Picture wobbles or drifts. • Channel Blanked. Set channel to ‘Add’ in Add/Del/Blnk menu. • TV station problems. Try a different channel. • Video menu not adjusted properly. Check Video menu option settings. • Check for disturbing source.
Troubleshooting Some Quick and Easy Tips for Resolving Problems Symptom(s) Possible Cause(s) Possible Solution(s) Page(s) Parental Control Problems Guest has left Parental Control active, password is not known. • Parental Control needs to be reset. Protected/blocked • Program content is restricted. message shows on-screen. • Don’t know password. Press and hold down MENU key until menu disappears. 16 Key in 9-8-7-6 and press CC.
Glossary A list of definitions for some of the words found in this guide 75 OHM RF CABLE The wire that comes from an off-air antenna or cable service provider. The end looks looks like a hex-shaped nut with a wire sticking through the middle. It screws onto the threaded jack on the back of the TV. 300 TO 75 OHM A small device that connects a two-wire 300 ohm antenna to a 75 ohm RF jack.
Notes This page is available for the Installer to make notes as they relate to this TV set up Page 60 206-4065
Notes This page is available for the Installer to make notes as they relate to this TV set up 206-4065 Page 61
Notes This page is available for the Installer to make notes as they relate to this TV set up Page 62 206-4065
Notes This page is available for the Installer to make notes as they relate to this TV set up 206-4065 Page 63
Zenith HealthView TV Warranty HealthView Color TV Welcome to the LG family! We believe that you will be pleased with your new Zenith TV. Please read this warranty carefully, it is a “LIMITED WARRANTY” as defined under Federal Law. This warranty gives you specific legal rights, and you may also have other rights that vary from state-tostate within the U.S.A.
