If you have a HDMI TV or monitor, you can connect it
to this player using a HDMI cable.
1. Set the TV’s source to HDMI (refer to TV’s
2. Connect the HDMI OUT jack on the unit to the
HDMI jack on a HDMI compatible TV or
3. Press RESOLUTION repeatedly to select the
• Both PCM and Bitstream Audio out is available,
when the sample frequency is set to 48
• If Audio setup is set to bitstream and your TV does
not support Bitstream Audio out in HDMI
connection, audio sound may not output or
• When the no sound or noisy sound are output with
HDMI connection, set the Audio option [Dolby
Digital, DTS or MPEG] in the SETUP menu to PCM
• The arrow on the cable connector body should face
up for correct alignment with the connector on the
• If there is noise or lines on the screen, please
check the HDMI cable.
• Not all HDCP-compatible DVI devices will work with
• If your HDMI TV does not support HDCP,
the blue screen appears on the screen.
• If the abnormal picture appears on the TV screen,
turn off the unit and then turn the unit on again.
• When you use HDMI connection, you can change
the resolution (480i, 480p, 720p, 1080i)for the HDMI
• The HDMI will out at 480p resolution, even if you
set the resolution to 480i on the HDMI connection.
HDMI (High Definition Multimedia Interface) supports
both video and audio on a single digital connection for
use with DVD Players, Set-Top Boxes, and other AV
HDMI was developed to provide the technologies of
HDCP (High-bandwidth Digital Content Protection).
HDCP is used to protect digital content transmitted
HDMI has the capability to support standard,
enhanced, or high-definition video plus standard to
multi-channel surround-sound audio, HDMI features
include uncompressed digital video, a bandwidth of up
to 5 gigabytes per second, one connector (instead of
several cables and connectors), and communication
between the AV source and AV devices such as
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI licensing LLC.