Installation and Operating Guide | Warranty Model Number | XBR411 | VCR / DVD Recorder Call us and we will guide you through your first recording, for free. CD-R/RW Call 1-877-9Zenith (1-877-993-6484) © Copyright 2004, LG Electronics U.S.A., Inc.
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS MANUAL FOR FUTURE REFERENCE. This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following procedures for installation, use, and servicing. This product does not contain any parts that can be repaired by the user.
Table of Contents INTRODUCTION Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . 2 IMPORTANT SAFETY INSTRUCTIONS . . . . . . . 3 Table of Contents . . . . . . . . . . . . . . . . . . . . . . 4-5 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10 Recordable Discs . . . . . . . . . . . . . . . . . . . . . . . 6 Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . 6 Disc-related terms . . . . . . . . . . . . . . . . . . . . . . 6 About Symbols . . . . . . . . . . .
Table of Contents Operation with DVD . . . . . . . . . . . . . . . . . . 30-33 Playing a DVD . . . . . . . . . . . . . . . . . . . . . 30-33 • Moving to another TITLEs . . . . . . . . . . . . 30 • Moving to another CHAPTERs . . . . . . . . . 30 • Slow Motion . . . . . . . . . . . . . . . . . . . . . . . 30 • Still Picture and Frame-by-Frame Playback . 31 • Search . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 • Random . . . . . . . . . . . . . . . . . . . . . . . . . . 31 • Repeat . . . . . . . .
Overview Recordable Discs DVD-RW (DVD - ReWritable): These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again on the same Disc. DVD-R (DVD - Recordable): These Discs can be recorded only once. After you finalize a DVD-R, you cannot record on it or edit it. Notes : • This recorder cannot record CD-R or CD-RW discs.
Overview (Continued) Title (DVD only) The main film content or accompanying feature content or music album. Each title is assigned a title reference number enabling you to locate it easily. Chapter (DVD only) Sections of a picture or a musical piece that are smaller than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number to enable you to locate the chapter you want. Depending on the disc, chapters may not be labeled.
Overview (Continued) About DVD-R and DVD-RW disc Is editing a DVD like editing a video tape? How are DVD-R and DVD-RW discs different? The essential difference between DVD-R and DVD-RW is that DVD-R is a record-once medium, while DVD-RW is a re-recordable/erasable medium. You can re-record/ erase a DVD-RW disc approximately 1,000 times. No. When you edit a video tape you need one video deck to play the original tape and another to record the edits.
Notes for recording Restrictions on video recording • The recording times shown are not exact because the VCR/DVD Recorder uses variable bit-rate video compression. This means that the exact recording time will depend on the material being recorded. • When recording a TV broadcast, if the reception is poor or the picture contains interference, the recording times may be shorter. • If you record still pictures or audio only, the recording time may be longer.
Overview (Continued) Precautions Handling the unit When shipping the unit The original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packaged at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. In this case, position the unit away from the TV, VCR, or radio, or turn off the unit after removing the disc.
Front Panel Cassette Compartment (VCR deck) Insert a video cassette here. Z OPEN/CLOSE Opens or closes the disc tray. Disc Tray (DVD deck) Insert a disc here. DUB (DUBBING) Press to copy DVD to VCR (or VCR to DVD). CH (v / V) Scans up or down through memorized channels. Z EJECT Ejects the tape in the VCR deck. INTRODUCTION POWER button and indicator Switches the VCR/DVD Recorder ON and OFF. Lights green when the VCR/DVD Recorder is turned on.
Function Display Window Disc type indicators Indicates the type of disc loaded. Indicates when the recorder is in timer recording or a timer recording is programmed. REC The recorder is recording. PRG Programmed playback active. TTL Indicates current title. A disc is inserted in the DVD deck. A VHS tape is inserted in the VCR deck. Indicates a DVD-RW disc (VR mode only) is inserted in the DVD deck.
Remote Control Overview POWER OPEN/CLOSE, EJECT Turns VCR/DVD Recorder ON and OFF. TV/VCR DUBBING To view channels selected by the VCR tuner or by the TV tuner. Press to copy DVD to VCR (or VCR to DVD). DVD Select the VCR/DVD Recorder’s function mode to DVD. CLEAR Removes a mark on the Marker Search menu. VCR Select the VCR/DVD Recorder’s function mode to VCR. TITLE Displays the disc’s Title menu, if available. INPUT Changes the input to use for recording (Tuner, AV1 or AV2).
Rear Panel ANT.IN Connect the VHF/UHF/CATV antenna to this terminal. AV 1 IN (VIDEO IN /AUDIO IN (Left/Right)) Connect the audio/video output of an external source (Audio system, TV/Monitor, VCR, Camcorder). A/V OUT (VIDEO OUT/AUDIO OUT (Left/Right)) Connect to a TV with video and audio inputs. COMPONENT/PROGRESSIVE SCAN VIDEO OUT (Y Pb Pr) Connect to a TV with Y Pb Pr inputs. AUDIO OUT (Left/Right) Connect to a TV or other equipment with audio inputs.
Connections Caution • Make sure the VCR/DVD Recorder is connected directly to the TV. Tune the TV to the correct video input channel. • Do not connect the VCR/DVD Recorder’s AUDIO OUT jack to the phono in jack (record deck) of your audio system. • Do not connect your VCR/DVD Recorder via your VCR. The DVD image could be distorted by the copy protection system. Connecting Antenna/Cable TV to VCR/DVD Recorder the antenna leads from the rear of the 1 Disconnect TV. the type of cable from your antenna.
Connections (Continued) Connecting to a TV S-Video connection Make one of the following connections, depending on the capabilities of your existing equipment. 1 RF coaxial connection the Left and Right AUDIO OUT jacks from 2 Connect the VCR/DVD Recorder to the audio left/right in jacks on the TV using the audio cables (A). Connect the RF.OUT jack on the VCR/DVD Recorder to the antenna in jack on the TV using the 75-ohm Coaxial Cable supplied (R).
Connections (Continued) Connecting to Optional Equipment Rear of VCR/DVD Recorder DVR HOOKUP Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/ Pro Logic Connect the Left and Right AUDIO OUT jacks on the VCR/DVD Recorder to the audio left and right in jacks on your amplifier, receiver, or stereo system, using the audio cables (A).
Before Operation Initial Settings In this menu system, there are several ways to customize the settings provided. Most menus consist of three levels to set up the options, but some require greater depth for the variety of settings. If you press SETUP, only the first and second level of the menu system will appear on the TV screen. The third level can be displayed by pressing B. For navigating the menu levels, you will see “B” on the right side of the menu label to help you go to the next level.
To Add or Erase Channels from Memory This feature allows you to add to or erase channels from memory manually. steps 1-3 as shown above to the 1 Follow previous page (Auto Channel Set). 2 Use v / V to select the CH. Add/Del option. 3 Press B to move to the third level. ). ENTER ( 4 Press The Channel Edit menu appears. the GENERAL menu is selected, press B 3 While to move to the second level. 4 Use v / V to select the “Clock Set” option. 5 Press B to move to the third level.
Before Operation (Continued) TV Aspect Factory Setting 4:3 Letter Box: Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and below the picture. 4:3 Pan Scan: Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Both sides of the picture are cut off. 16:9 Wide: Select when a 16:9 wide TV is connected. If you wish, you can reset the VCR/DVD Recorder to its original factory settings. Select “SET” then press ).
Before Operation (Continued) Each DVD disc has a variety of audio output options. Set the VCR/DVD Recorder’s Audio Output according to the type of audio system you use. Dolby Digital PCM: Select when connected to a 2-channel digital stereo amplifier. The VCR/DVD Recorder’s digital audio outputs sounds in the PCM 2ch format when you play a DVD video disc recorded on the Dolby Digital recording system.
Before Operation (Continued) Level 1 to 8: Some discs contain scenes not suitable for children. If you set a rating for the recorder, all disc scenes with the same rating or lower will be played. Higher rated scenes will not be played unless an alternative scene is available on the disc. The alternative must have the same rating or a lower one. If no suitable alternative is found, playback will stop. You must enter the 4-digit password or change the rating level in order to play the disc.
Country Code RECORD Enter the code of a country/area whose standards were used to rate the DVD video disc, referring to the list (See “Country Code List”, page 54). Disc Record Mode Movie Rating You can set the picture quality for DVD recording; XP (High quality), SP (Standard quality), LP (Low quality), EP (Extend quality). Set Password Country Code U S Disc Record Mode XP VCR Record Mode SP Auto Chapter LP EP Prev. Select Close Press SETUP. The Setup menu appears.
Before Operation (Continued) Auto Chapter 7 During recording, chapter markers are added automatically at fixed intervals. You can set this interval to 5 minutes or 10 minutes. To turn off automatic chapter marking, select “None”. Use b / B to select a desired Disc Initialize Mode (VR Mode or Video Mode) then press ). ENTER ( Disc Initialize Select a mode.
Disc Finalize Disc Protect Finalizing ‘fixes’ the recordings in place so that the disc can be played on a regular DVD player or computer equipped with a suitable DVD-ROM drive. Finalizing a Video mode disc creates a menu screen for navigating the disc. This is accessed by pressing DISC MENU/LIST or TITLE. When recording in VR mode formatted DVD-RW disc, set to ON to prevent accidental recording, editing or erasing of the disc loaded. If you need to unlock the disc to make edits, select OFF.
Before Operation (Continued) You can also use the Remote Control to Disc Label Use the Disc Label feature to enter a name for the disc. This name appears when you load the disc and when you display disc information on-screen. • The Disc label can be up to 32 characters long. • For discs formatted on a different DVD Recorder, you will see only a limited character set. Disc Initialize Edit Disc Protect Prev. Select Close steps 1-3 as shown “Disc Initialize” on 1 Follow page 24.
Before Operation (Continued) This manual gives basic instructions for operating the VCR/DVD Recorder. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by the VCR/DVD Recorder or is not available on the disc. Displaying Information on-screen You can display various information about the disc or tape loaded on-screen.
Before Operation (Continued) OSD Menu Options by Media Type Shows the elapsed playing time and total time. DVD Shows the current title/chapter number and total number of titles/chapters Title DVD : 1/4 Chapter : 3/28 Menu Options 0:06:32 / 2:12:10 Function (Use v / V to select desired option) Title Number 1/6 Chapter Number 4/26 Time search - : -- : -- Audio language and Digital Audio Output mode Subtitle language 1. ABC Angle Sound 5.
Before Operation (Continued) Video Shows the elapsed playing time and total time. Shows the title name, recording date, recording mode. 01/02/03 Menu Options Chapter Number Audio language and Digital Audio Output mode Sound LP 0:06:32 / 2:12:10 Selection Method Function (Use v / V to select desired option) Title Number Time search Shows the Current mode. DVD Title 1 1/6 Shows the current title number and total number of titles, and skips to the desired title number.
Operation with DVD Playing a DVD Playback Setup • Before using the remote control, press the DVD button to select the device to be operated. • Turn the TV on and select the video input source connected to the VCR/DVD Recorder. • Audio system: Turn the audio system on and select the input source connected to the VCR/DVD Recorder. 1 Press OPEN/CLOSE to open the disc tray. your chosen disc in the tray, with the 2 Load playback side down. OPEN/CLOSE to close the tray.
Operation with DVD (Continued) Still Picture and Frame-by-Frame VR Playback DVD Video 1 Press PAUSE/STEP (X) during playback. The recorder will now go into PAUSE mode. 2 You can advance or back up the picture frame-byframe by pressing b / B repeatedly during PAUSE mode. Search DVD Video VR 1 Press BACKWARD (m) or FORWARD (M) during playback. Repeat REPEAT DVD Video VR CHAPTER DVD Discs - Repeat Chapter/Title/All/Off Press REPEAT to select a desired repeat mode.
Operation with DVD (Continued) To Recall a Marked Scene Playing a DVD (continued) Time Search 1 During disc playback, press SEARCH. DVD Video VR The Marker Search menu will appear on the TV screen. - : -- : -- Marker Search The Time Search function allows you to start playing at any chosen time on the disc. 1 Press DISPLAY twice during playback. The on-screen display appears on the TV screen. The Time Search box shows the elapsed playing time of the current disc.
Operation with DVD (Continued) Camera Angle Last Condition Memory DVD 1/3 If the disc contains scenes recorded at different camera angles, you can change to a different camera angle during playback. Press ANGLE then press b / B repeatedly during playback to select a desired angle. The number of the current angle appears on the TV screen. Tip : The Camera Angle icon is displayed on the TV screen when alternate angles are available. Changing the Audio Language 1. DVD 5.
Audio CD and MP3/WMA Operation Playing an Audio CD or MP3/WMA Disc CD MP3 WMA The VCR/DVD Recorder can play Audio CDs and MP3/WMA files on CD-ROM, CD-R, CD-RW discs or DVD-R/-RW. Before playing MP3/WMA files, read “Notes on MP3/WMA Recordings” on page 35. 1. To display menu options, select a tack (or folder) on the menu then press ENTER ( ). 2. Use v / V to select an option then press ENTER ( ) to confirm your selection. Music-Audio CD menu options Play Insert a disc and close the tray.
Audio CD and MP3/WMA Operation (Continued) CD MP3 WMA Repeat A-B CD 1 Press PAUSE/STEP (X) during playback. To repeat a sequence in a title: 2 To return to playback, press PAUSE/STEP (X) again. 1 Press A-B at your chosen start point. Repeat icon and “A-” appears on the menu screen. Moving to Another Track CD MP3 The Repeat icon and “A - B” appears on the left side of menu screen, and the repeat sequence begins. WMA Press SKIP .
Programmed Playback with Audio CD and MP3/WMA The Program function enables you to store your favorite tracks from any disc in the recorder memory. Program can contain 99 tracks (Audio CD) or 256 tracks (MP3/WMA). Audio CD : Use B to move the tracks to the 5 Program list. The programmed track you selected last is highlighted on the program list. MP3/WMA : Go to next step. 1 Insert an Audio CD or MP3/WMA disc. Use v / V to select the track you want to start 6 playing.
Programmed Playback with Audio CD and MP3/WMA (Continued) Repeat Programmed Tracks Press REPEAT to select a desired Repeat mode. PLAYBACK • TRACK : Repeats the current track. • ALL : Repeats all the tracks on the program list • OFF (no display) : Does not play repeatedly. Erasing a Track from the Program List 1 Select the track that you wish to erase from the Program List then press ENTER ( ). The options appears on the left side of the menu. 2 Select the Delete icon then press ENTER ( ).
Photo Disc Operation Viewing a JPEG File JPEG M/C The VCR/DVD Recorder can play Kodak picture CD or JPEG files on CD-R/RW and DVD-R/RW discs. Before playing JPEG recordings, read “Notes on JPEG Recordings” on page 39. 1 Insert a disc and close the tray. The Photo-CD menu appears on the TV screen. Photo To stop viewing at any time, press STOP. 5 The Photo-CD menu reappears. Photo menu options 1. To display menu options, select a file (or folder) on the menu then press ENTER ( ). 2.
Photo Disc Operation (Continued) Use PAUSE/STEP (X) while showing a picture to pause mode. Skip Images While viewing a picture, press SKIP (. or >) once to advance to the next file or return to the previous file. Rotate Images Use v / V while viewing a picture to flip the picture clockwise or counterclockwise. View Slide Shows 1. Select “Slide Show” option on the Photo-CD menu. 2. Press ENTER ( ). The Slide Show menu appears.
VCR Mode Tape Playback Preparation Special Effect Playback Special effects playback notes Before using the remote control, press the VCR button to select the device to be operated. Turn the TV on and select the video input source connected to the VCR/DVD Recorder. Audio system: Turn the audio system on and select the input source connected to the VCR/DVD Recorder. Normal Playback 1 VHS Insert a prerecorded video cassette.
Basic Recording from a TV Instant Timer Recording Follow the instructions below to record a TV program. Recording starts immediately and continues until the disc or tape is full or you stop the recording. Instant Timer Recording allows you to make a recording easily of a preset length without using the program timer. 1 Switch on the VCR/DVD Recorder, select the device (VCR or DVD) for Recording and load a recordable disc or tape. Also make sure that the TV input is set to this recorder.
Basic Recording (Continued) Dubbing from DVD to VCR Dubbing from VCR to DVD You can copy the contents of a DVD to a VHS tape using the DUBBING (or DUB) button. No t e : If the DVD (or Discs) you are attempting to copy is copy protected, you will not be able to copy the disc. It is not permitted to copy Macrovision encoded DVDs (or Discs). “Copy-protected. Cannot record.” is displayed on the TV screen. You can copy the contents of a VHS tape to a DVD-R or DVD-RW using the DUBBING (DUB) button.
Timer Recording 1 Media DVD OK 2 Programming can be checked whenever the VCR/DVD Recorder is turned on. Press TIMER REC twice. • Use v / V to select a timer recording. Press TIMER REC. The Timer Record menu will appear. Timer Record Ch. Ch.11 SP 198 min Free Date Start Time End Time Mode 01/02 Fri 10:07 AM 11:00 AM EP TIMER REC Timer Rec List Checking Timer Recording Details • Press ENTER ( ) to edit the selected program. Timer Record menu appears.
Recording from an External Input Recording from External Components You can record from an external component, such as a camcorder or VCR, connected to any of the VCR/DVD Recorder’s external inputs. 1 Make sure that the component you want to record from is connected properly to the VCR/DVD Recorder. See page 17. INPUT repeatedly to select the external 2 Press input to record from. Playing Recordings on Other DVD Players Most regular DVD players can play finalized discs recorded in Video mode.
Title List and Chapter List Menu VR The Title List-Original is where you build and edit your Playlist, and where you can delete titles and make other changes to the Original content of the disc. You can also play individual titles directly from the Title ListOriginal menu. 1 Press DISC MENU/LIST repeatedly to display the Title List-Original menu. • Use the v/V buttons to display the previous/next page if there are more than 6 titles or chapters. • To exit the menu, press RETURN (O).
Title List and Chapter List Menu (Continued) Using the Title List-Playlist Menu 1 VR Press DISC MENU/LIST repeatedly to display the Title List-Playlist menu. • Use the v/V buttons to display the previous/next page if there are more than 6 titles or chapters. • To exit the Title List-Playlist, press RETURN (O). 1/2 Title List Playlist TITLE 1 10/12 0:25:20 TITLE 2 10/14 Using the Chapter List-Playlist Menu VR DISC MENU/LIST repeatedly to display the 1 Press Title List-Playlist menu.
Title List and Chapter List Menu (Continued) Video From the Title List display you can play, name and erase titles. Once a Video mode disc is finalized, the Title List screen changes its appearance and all you can do is select titles to play. 1 Press DISC MENU/LIST to display the Title List. Title List 1/3 Title DVD VIDEO 1hour 57min SP Free TITLE 1 Date 1/ 3 Duration 0:02:01 TITLE 2 1/ 3 0:06:21 TITLE 3 4/ 12 0:52:31 Select DISPLAY Info.
Title and Chapter Editing Edits you make to the Original content changes the actual content of the disc. For example, if you delete a title or chapter from the Original content (Title or Chapter), that title or chapter is deleted from the disc, freeing up extra recording time. When you edit the Playlist, on the other hand, you are not changing the content of the disc.
Title and Chapter Editing (Continued) VR Use this function to add an Original title or chapter to the Playlist. When you do this, the whole title or chapter is put into the Playlist (you can delete bits you don’t need later — see Deleting a Title/Chapter on page 50). The title appears in the Playlist complete with the chapter markers that appear in the Original. However, if you add more chapter markers to the Original later, these are not automatically copied over into the Playlist title.
Title and Chapter Editing (Continued) Deleting a Title/Chapter VR When you erase a title or chapter from the Playlist menu on DVD-RW discs formatted in VR mode, you only remove it from the Playlist; the title/chapter remains in the Original menu. If you choose to delete a title or chapter from Title List or Chapter List menu, the title or chapter is actually deleted from the disc and the remaining time available for recording increases.
Title and Chapter Editing (Continued) VR Combining Two Chapters Into One Video VR You can name Original and Playlist titles independently. 1 On the Title List menu, use v V b B to choose the title you want to name then press ). ENTER ( Options appears on the left side of the menu. Use this function to combine two adjacent Playlist or Original chapters into one. The Keyboard menu appears. On the Chapter List menu, select the second chapter of the two chapters you want to com ).
Title and Chapter Editing (Continued) Moving a Playlist Chapter VR Use this function to re-arrange the playing order of Playlist chapters on the Title List-Playlist menu. 1 Press DISC MENU/LIST repeatedly to display Title List-Playlist menu. To display the Chapter List-Playlist menu, refer to “Using the Chapter List-Playlist” on page 46. No t e : This function is not available if there is only one chapter.
You can control the sound level, input source, and power switch of your LG TV with the supplied remote. Controlling other TVs with the remote You can control your TV using the buttons below. You can control the sound level, input source, and power switch of non-LG TVs as well. If your TV is listed in the table below, set the appropriate manufacturer code. 1. While holding down TV POWER button, press the number buttons to select the manufacturer code for your TV (see the table below). 2.
Language Code and Country Code List Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Solution No power. The power cord is disconnected. Plug the power cord into the wall outlet securely. No picture. The TV is not set to receive VCR/DVD Recorder signal output. Select the appropriate video input on the TV so the picture from the VCR/DVD Recorder appears on the TV screen. The video cable is not connected securely. Connect the video cable securely.
Troubleshooting (Continued) Cause Symptom Cannot record or did not record successfully. Timer Recording not possible. Stereo Audio Record and/or Playback not present. Remote control does not work properly. Solution The remaining blank space on the disc is insufficient. Use another disc. The source you are trying to record is copyprotected. You cannot record the source. When setting the recording channel, the channel is tuned on the TV’s own tuner.
Specifications General AC 120V, 60 Hz 35W 430 X 78.5 X 354 mm (16.9 x 3.1 x 13.9 inches) (w x h x d) 5.6 kg (12.32 lbs) 5˚C to 35˚C (41˚F to 95˚F) 5 % to 90 % NTSC REFERENCE Power requirements Power consumption Dimensions (approx.) Mass (approx.
Specifications (Continued) Outputs VIDEO OUT S-VIDEO OUT COMPONENT VIDEO OUT (PROGRESSIVE SCAN) Audio output (digital audio) Audio output (analog audio) RF OUT 1 Vp-p 75 Ω, sync negative, RCA jack x 1 (Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1 (C) 0.286 V (p-p) 75 Ω (Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1 (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2 0.5 V (p-p), 75 Ω, RCA jack x 1 1.1 Vrms (1 kHz, -6 dB), 600 Ω, RCA jack (L, R) x 2 Channel 3 or 4 (Switchable) Accessory: Video cable .
Zenith Limited Warranty - USA This Zenith product, will be repaired or replaced, at Zenith’s option, if it proves to be defective in material or workmanship, under normal use, during the warranty period (“Warranty Period”) listed below, effective from the date (“Date of Purchase”) of original consumer purchase of the product. This warranty is good only to the original purchaser of the product and effective only when used in the United States, excluding U.S. Territories.