Technical data

18
EN
Zenith E- Zenith Club E
7.5.3
CONTINUOUS DISPENSING MODE ACTIVATION
By pressing both keys (3) and (5) the continuous mode is activated.
Both dose keys light up and the continuous dispensing symbol appears (16)
.
By pressing the grinding start key (11) for more than 0.3 seconds, continuous dispensing is
activated until the grinding activation key is released.
By pressing one of the keys (3)
or (5) you return to the automatic mode of dose
selection.
7.5.4 DOSE COUNTER ZEROING
By pressing both keys (4) and (2) for more than 5 seconds, both dose counters
are reset (19-22).
7.5.5 FUNCTION BLOCK
By pressing both keys (4) and (2) and releasing them, all functions are blocked
except the dose selection and the dispensing start.
Furthermore, display shows the symbol (20)
g
.
After having pressed the keys (4)
and (2) , when releasing them, all functions
stop.
7.5.6 APPLIANCE SWITCH ON WITH CONCEALED CONTENTS
If the key (3) is kept pressed, when switching the appliance on, a screen is entered
where the following data are displayed:
 Firmware version.
 1 and 2 dose total counter cannot be reset.
 In the middle, the dispensing time counter in continuous mode (in seconds) which cannot
be reset.
7.5.7 APPLIANCE DEFAULT VALUE SETTING
If the key (5) is kept pressed, when switching the appliance on, its values are brought
to the preset default ones.
The concealed counters are not reset.
The display appears as the one of appliance switch on (see paragraph 7.5.6).