Service manual

PV152 2-18 PROJO
3. Repeat the same 3X3 steps 3 to 5, for the Green 13X9
Mode Adjustment.
Red 13X9 Mode Alignment
1. Press the 0 key to select the RED + GREEN internal cross-
hatch signals.
2. Repeat the 7x5 steps 2 to 3 for the Red 13X9 mode
adjustments.
Blue 13X9 Mode Alignment
3. Press the SOURCE key to select the BLUE + GREEN colors.
4. Repeat the 7x5 steps 2 to 3 for the Blue 13X9 mode
adjustment.
Red Alignment
Yellow Cross-hatch
Blue Alignment
Magenta Cross-hatch
ROM WRITE
Storing the New Data
Press the “-” button twice to store the convergence data
in the EPROM. (Screen goes blank for 4 seconds)
1. 1st press of “-”
2. 2nd press of “-”
3. Operation complete (Green Dots appear after completion
of operation).
CONVERGENCE ADJUSTMENT PROCEDURE