Instruction manual

PAGE 10 I INSTALLATION
Things you must do before you can operate yOUTVCR.
Connect the Power
(Required) Plug your VCRinto an unswitched
120 Vac, 60 Hz household power outlet. Turn on
the VCRby pressingthe POWERon the remote
or on the VCR'sfront panel. While plugged into
an AC o_let,the VCR consumes 3W of eLectTical
power in OFF condition.
_ Do not plug the VCRinto o switchedpower
outlet. Otherwise, when the power is
switched oj_, the VCRturns o_. Youmay
then hove to reset the time and date, and
reprogramoperational/eotures.
B
Set your VCR's Clock and Tuner automaUcal[y
After you connect an antenna (or cable company).
and you plug your VCRinto a 120 Vac, 60 Hz
power outlet, the VERwilt set the clock and
place channels into memory automaUcaLLy.The
"SEARCH" messagewit[ blink for 2-5 minutes in
the VCR'sfront panel display during auto setting.
[_] The auto clock set works only in areas
where Data Service (DS) signals are
provided along with normal W signals,
Ifthereisnot channelthatismernodzed,
"No DATA"will appear.
Set PosiUon of the CH3/CH4 Switch
(Required) The CH3/CH4 switch on the VCR's
back panel determines which channel the VCR
usesto send video signals to your TV.The IV
must be tuned to the same channel you set with
the CH3/CH4 switchto see tape playbackand
statusdisplaysfrom the VER. To determine
which videochannelprovidesthe bestpictur6
foryour system,trythe switchinEH3 position
and tune your TV to channel3;thentrythe CH4
positionand tune your TV to channel4.
For a test display, pressthe TV/VCR button on
remote repeatedly until the VCR indicator Eght
appearsin the VCR'sfrontpar_ldisplay.Press
MENU on the remoteto see the main menu.
Select SpeakEZ Function (On/Off)
A voicetells youhowto usethe featuresin the
menusif SpeakEZis ON,(ONis recommended.)
Seethe AUDIOMenufor details.
[_ SpeokEZ_unctions with ENGLISHand
SPANISH.
WALL
SWITCH
POWER
OUTLET
IYPICALZENITH VCR _
P_ess 6,
SpeakE2
CLOCK
Tg/_g
SEep
AUDIO
PreSsnumberkeys
QUIT=exit
MAIN MENU
ADD_MEHU
v Spe_EZ:ON lION _IOFF
PLAYBACK:HI.FI
RECORD:STEREO
Pressnumberkeys
then ENTER QUIT= exit
w
Press NUMBER (1 or 2) to
choose ON or OFF