Instruction manual

PAGE 24 I OPERATION
TheTIMERMenuteLLstheVCR whentorecorda programon adayand ata timeyou specify.
You canspecifyeightdifferenteventstobe recordedina one-yearperiod.
SpeJkEZ
CLOCK
TIMER
SETUP
AUDIO
Pressnumberkeys
QUIT= exit
Press2
PROGRAM[]
MONTH:
DAY
START
STOP
CHANNEL:
SPEED :
REPEAT:
(1-8) toselectprogram
ENTERto adjustprogram
[]
mmm
• PROGRAM []
MONTH :
DAY
START
STOP
CHANNEL :
SPEED :
REPEAT:
(1-8) to select program
• ENTER to adjust program
Month ofRecordin
Day ofRecording
StartTime of
Stop Time of
Channelof
Speed of Recordinc
Frequency PressQUIT/CC
t
Timer will be on
when VCR Is off
How to Use Timer
I. ChooseTIMER menu asdescribedin "How to AccessMenus"
on page 9.
2. When the TIMER menu isdispiayedon screen,pressthe
ENTER buttonto selectthe correctmonth, then pressthe
ENTER buttonagainto move the nextoptionorsetting.
3. When you have enteredallofthe settingsto your
satisfaction,pressQUIT/ECto exitthe menu system.
Note:
Set the VCRin TIMER mode by pressingPOWERto turn off the VER.
The TIMERindicator Lightappearsin the front pane[ of the VEIL
Number
When highlighted, pressNUMBER(1-8) to
choose program Number.
REPEAT OPTIONS
ONCE-- Records once.
WEEKLY-- Recordsonce each week.
DAILY-- Recordsone time each day,
Monday - Friday.
CHANNEL OPTIONS
To seLect an AUX channel, select the next
highest or towest channel programmed in
the VCR with the CH (Y/&).
SPEEDOPTIONS (SP or EP)
TheSPmodedetermineshowmuchtapeis
Leftand switchesspeedfromSPto EP,if
necessary,to complete recordingthe
program.Therewilt besomepictureand
sounddistortionat the pointof the speed
change.
AM/PM OPTIONS
PressI ForAM
Press2 forPM
Youcannotoperatethe VCRmanuallywhile it is
recording.PressingPOWERStopsthe recording.
TOErase a Program
1. ChooseTIMERmenuasdescribedin "How to AccessMenus"
onpageg.
2. PressNUMBER(I-8)to setectdesiredPROGRAMto be erased.
3. Press0 to erasethe program.
4. PressQUIT/EEto exit the menusystem.
PROGRAM []
MON_t 7 JULY
DAY 20 TUE
START 11:16 AM
STOP 11:46 AM
CHANNEL : 2OTV
SPEED : EP
REPEAT: ONCE
(1-8) to select program
TO erase press 10)
Press 0 to erase program
FoLLow
_}._these
steps