Instruction manual

PAGE32 I OPERATION
Recording using preset time periods.
Preset Time Periods for ITR Recording.
Note:
Preset recording Ume counts down until the recording time
lS over.
Instant (attended) Timer Recording (ITR) l.ets you record for
a specific preset time period, instead of recording until the
end of tape is reached. For exampl.e, you can record a
30-minute show using the preset time period.
Turn TVand VCR on.
PLaceVCRin VCRmode by pressing the TV/VCR
button on the remote repeatedLy untiLthe VCR
indicator Lightappears in the VCRfront paneL.
Setect channe| 3 or 4 at the W, Ifyou have
connected your VCRto the TV'sA/V input jacks,
select the A/V source at the TV for a better
picture.
SeLectthe channel, to be watched and recorded
at the VCR.If you have a cabl.e box, select the
cabLebox output channel (usuaLLy3 or 4) at the
VCR. Selectcablebox channelsatthe cablebox,
Inserta VHS cassettetape intothe VCR,
m
PressSP/EPto sel.ectrecoTdingspeed,ifdesired.
Recordingspeed isaLwaysSP,unlessyou seLect
EP.
Note:The SP mode determineshow much tapeis
Leftand switchesspeed from SP to EP,if
necessanj,to compLeterecordingthe program.
There wiLLbe some pictureand sound distoff,ion
atthe pointofthe speed change.
PressREC/ITRuntiLrecordingbegins_The RE(:
indicatorLightappearsinthe VCR frontpanel..
Recordingcontinuesuntil.youreachthe end of •
the tape,or unti{you pressSTOP to step
recording.
PressREC/ITRrepeatedlyto selecta p_eset
recordingtime period.Each subsequentpressof
REC/ITRincreasesthe recordingtime by 30
minutesuntiLyou reacha maximum of 4 hours.
rec/_r
Remote'sControl.s
power sp/ep recMr stop/eject
VCR'sConbob
presses of
_EC/_
'1 (Press)
2
3
4
DJsptay
Current Time
0:30
1:00
_:30
Preset Time For
Reconlin9
UnU[ end oftape
30 ml.nutes
1 hours
1 hour and
30 minutes
2 hours
5 2:00
g 4:00 4 hours
10 No displ.ay no'rmaLrecording