Owner`s manual

ExternalControlDeviceSetup
01. Power (Command2:a)
• To control Power On/Off of the TV.
Transmission
[[kl[a][ ][Set Ig][ ][gata][Cr] ]
Data 0 :Power Off 1
Acknowledgement
[[a][ ][Set Ig][ ][OK][gata][x] ]
• To show Power On/Off.
Transmission
[[kl[a][ ][Set ID][ ][FF][Cr] ]
Data 0 :Power Off 1
Acknowledgement
[[a][ ][Set Ig][ ][OK][gata][x] ]
• Power On
" Power On
* In a like manner, if other functions transmit 'FF' data
based on this format, Acknowledgement data feedback
presents status about each function•
02. Input Select (Command2:b) (Main Picture Input)
• To select input source for the TV.
You can also select an input source using the INPUT
SELECT button on the TV's remote control•
Transmission
[[k][b][ ][Set ID][ ][Data][Cr] ]
Data 0 :RGB 4 :DVI
1 : Component 5 :TV
2 : Video 6 : Video (Exp.)
3 : S-Video
Acknowledgement
[[b][ ][Set Ig][ ][OK][gata][x] ]
04. Screen Mute (Command2:d)
• To select screen mute on/off.
Transmission
[[k][d][ ][Set ID][ ][gata][Cr] ]
Data 0 : Screen mute off (Picture on)
1 : Screen mute on (Picture off)
Acknowledgement
[[d][ ][Set ID][ ][OK][Data][x] ]
05. Volume Mute (Command2:e)
• To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Transmission
IN[e][ ][Set ID][ ][Data][Cr] ]
Data 0 : Volume mute on (Volume off)
1 : Volume mute off (Volume on)
Acknowledgement
I[e][ ][Set ID][ ][OK][gata][x] ]
06. Volume Control (Command2:f)
• To adjust volume.
You can also adjust volume with the volume buttons
on remote control.
Transmission
I[kl[f][ ][Set ID][ ][Datal[Cr] I
Data Min :0~Max:64
• Refer to 'Real data mapping 1' as shown below.
Acknowledgement
I[f][ ][Set ID][ ][OK][Data][x] ]
03. Aspect Ratio (Command2:c) (Main picture format)
• To adjust the screen format.
You can also adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or in the
Screen menu.
Transmission
[[k][c][ ][Set ID][ ][Data][Cr] ]
Data 0 • Wide screen (16:9)
1 : Normal screen (4:3)
2 " Full screen (Zoom)
3 : Horizon
Acknowledgement
[[c][ ][Set Ig][ ][OK][gata][x] ]
• You select either 16:9 or 4:3 screen aspect ratio using the
PC, DTV 720p/1080i.
07. Contrast (Command2:g)
• To adjust screen contrast.
You can also adjust contrast in the Picture menu.
Transmission
[[k][g][ ][Set ID][ ][Data][Cr] ]
Data Min :0-Max:64
• Refer to 'Real data mapping 1' as shown below.
Acknowledgement
[[g][ ][Set ID][ ][OK][Data][x] ]
* Real data mapping 1
0 Step 0
A Step 10 (SET ID 10)
F Step 15 (SET ID 15)
10 Step 16 (SET ID 16)
64 Step 100
Owner's Manual 35