Operating Guide | Warranty Model Numbers | R56W28 | R65W28 | Projection TVs table of contents page © Copyright 2002, Zenith Electronics Corporation 5
RECORD YOUR MODEL NUMBER The model and serial number of your Entertainment MachineTM are located on the back of the TV cabinet. For your future convenience, we suggest that you record these numbers here: MODEL NO.____________________________________ SERIAL NO.____________________________________ WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS Important safeguards for you and your new product Your product has been manufactured and tested with your safety in mind. However, improper use can result in potential electrical shock or fire hazards. To avoid defeating the safeguards that have been built into your new product, please read and observe the following safety points when installing and using your new product, and save them for future reference.
IMPORTANT SAFETY INSTRUCTIONS (Continued from previous page) 14. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code (U.S.A.
Table of Contents Read the information below, then turn to page 6 to hook up your Entertainment Machine Step 1. Hook up external equipment and antenna or cable service wires to the TV, see pages 7 thru 16. Install batteries in the remote control. After all connections have been made, plug your TV into a standard household power outlet. Step 2. Go to page 15 - 16 for Signal Source selection and Scan, channel search. Step 3. Set up all other TV options see pages listed below. Safety Warnings . . . . . . . .
Hookup Directory IMPORTANT!! Use this page to decide what connections you need to make and to begin your setup. First, find the lines below that best describes what you want to do, then go to those page numbers. GENERAL HOOKUP INFORMATION About your Jacks For an overview of the jacks on your Entertainment Machine, go to . . . . . . . . . . . . . . . . . page 7 INPUT HOOKUP OPTIONS Antenna/Cable If you are using an antenna or have direct cable service, go to . . . . . . . . . . . . . . . . . . .
Source Connection Jacks Overview To hookup source equipment, refer to the Table of Contents on page 5; shows pages to go to for equipment hookup options. Also, see the front connections panel hookup options on page 20. See note below. Inputs 3 and 4 Y, PB, PR, and Audio L - R Component Video Some top-of-the-line DVD players use what is called “component video,” for extremely accurate picture reproduction. Refer to your DVD manual for further information.
Hook Up Direct Cable TV or Antenna Connect an off-air antenna OR Antenna Cable TV Wall Jack 1 Locate the Antenna/Cable 1 jack on the back of your Entertainment Machine. 2 Connect the cable that runs from the wall directly to this jack. 3 Turn to page 15 to continue setting up your Entertainment Machine.
Hook Up Cable Box Some cable services require the use of a cable box to decode premium channels and pay-per-view. Using the “To Cable Box” to Decoder option, and programming your remote, you can connect your cable box so that you only need your MBR remote to control all the channels. By connecting cable directly to your Entertainment Machine, then running it out to the cable box and back, you make the cable box another source to choose from in the Source selection on your remote.
Hook Up VCR Connect your off-air antenna and VCR to your Entertainment Machine 1 Locate the RF or VHF/UHF/CATV In jack on the back of your VCR. Connect the cable line coming from your wall directly to this jack. 2 Locate the Antenna/Cable 1 jack on the back of your Entertainment Machine. Connect the cable coming from the RF or VHF/UHF/CATV Out jack on the back of your VCR directly to this jack.
Hook Up Cable Box with VCR 1 Locate the RF or VHF/UHF/CATV In jack on the back of your VCR. Connect the cable line coming from your wall directly to this jack. 2 Locate the Antenna/Cable 1 jack on the back of your TV. Connect the cable that runs from the RF or VHF/UHF/CATV Out jack on the back of your VCR directly to this jack. 3 Now find the To Cable Box jack on your Entertainment Machine. Connect a cable from this jack to the Input jack on the back of your cable box.
Hook Up DVD Player and HD Set Top Box 1 Find the audio and composite or S-Video jacks on the back of your DVD Player and connect them as shown below, following the instructions provided with your equipment. 2 You may connect either the composite video or the S-Video cables to your Entertainment Machine Inputs 1 or 2. (Do not connect both the composite and the S-Video. In the event that you connect both composite DVD Player and the S-video cable, only the S-video will work.
Hook Up External Stereo Send the sound from your Entertainment Machine to an external audio amplifier system; use it to hear the audio 1 Locate the Variable Out jacks on the back of your Entertainment Machine and the Input jacks on the back of your stereo's amplifier. 2 Use appropriate audio cables to connect these jacks, making sure that the right and left channels are matched correctly; right to right, left to left. 3 Set up your speakers through your stereo, according to those directions.
Hook Up Monitor Out The Monitor Out jacks on your Entertainment Machine allow you to record to a second VCR! 1 Locate the Monitor Out jacks on the back of your Entertainment Machine and the Input jacks on the back of your VCR. Connect the Input jacks from your VCR to the Monitor Out jacks on the back of your Entertainment Machine as shown in the diagram. You may connect either the composite video or the S-video cables to your Entertainment Machine.
Signal Source Selection SEL VIDEO AUDIO THEATER SETUP Trilingual Menus Trilingual Menus Signal Antenna Signal Antenna Scan CATV 1 Scan CATV 1 Channel Add/Del CATV 2 Channel Add/Del CATV 2 Channel Review Channel Review Clock Set Clock Set HD Focus HD Focus Picture Formats Menu 1 Press select to set SEL SETUP SPECIAL Picture Formats To Menu Bar To Exit Quit Menu To Menu Bar To Exit Quit Use pages 7-14 to hook up your Entertainment Machine.
Scan (Channel Search) SEL SEL SETUP SPECIAL VIDEO AUDIO THEATER SETUP SPECIAL VIDEO AUDIO Trilingual Menus Trilingual Menus Signal Signal Scan Installing Channel Add/Del Channel Add/Del Channel 110 Channel Review Channel Review Clock Set Clock Set HD Focus HD Focus Picture Formats Picture Formats Scan Menu Begin To Menu Bar To Exit Quit Menu 50% Complete To Menu Bar Press select to set SEL THEATER To Exit Quit vcr cable dvd hd/stb tv SETUP light source power Tril
TV Mode Remote Key Functions SOURCE Selects available TV sources. LIGHT Lights keys for five seconds. POWER Turns TV On and Off. Mode Indicator Lights Light indicates mode when keys are pressed. MODES: TV, VCR, CABLE, DVD, HD/STB Switches remote operating mode to control other devices. Note: After pressing a Mode switch key, wait 2 - 3 seconds before pressing any other key. ASPECT Selects different picture proportion formats.
On-Screen Display This page explains your on-screen display, press DISPLAY on remote to show on screen RATING BROADCAST Displays the rating for the program currently being broadcast. AUDIO SELECTED Displays signal’s audio setting. MAIN PICTURE SOURCE Displays Main Picture Source (Active source highlighted). STEREO ST / SAP ANT 1 110 ABC 10 : 00 AM May 14 2002 TV - PG DLSV AUDIO BROADCAST Displays signal’s audio broadcast. CHANNEL LABEL Displays channel label you have chosen.
On-Screen Menu Operation “Sel” indicates that Select is the center bulls-eye on remote. Select is used to activate menu selections.
Sources/Equipment Hookup Options Choose the picture and sound source you want to see and hear ANTENNA/ CABLE 1 TO CABLE BOX ANTENNA/ CABLE 2 VARIABLE AUDIO OUT R L INPUT 1 INPUT 2 S-VIDEO S-VIDEO VIDEO VIDEO INPUT 3 MONITOR OUT INPUT 4 S-VIDEO VIDEO Y/VIDEO Y/VIDEO MONO/L PB MONO/L PB MONO/L R R PR R PR R R AUDIO AUDIO AUDIO AUDIO MONO/L AUDIO L S-VIDEO VIDEO L-AUDIO-R INPUT 5 (MONO) Camcorder R -AUD IO-L AUDIO VIDEO /VIDEO OUT R -AUD IO-L AUDIO VIDEO /VID
Front Panel Controls and Inputs Use the front panel to operate the TV’s basic features and use the front source inputs to make temporary connections - - to use a camcorder for example 1 To access the menus, press the MENU button on the panel. Also use MENU as the SELECT key when required. 2 Use the VOLUME Left/Right buttons as the LEFT/RIGHT arrow buttons on your remote. 3 Use the CHANNEL Up/Down buttons as the UP/DOWN arrow buttons on your remote.
On-Screen Menus Overview Descriptions of the on-screen menus Using MENU, the Up/Down/Left/Right arrows, and the thumbstick bulls-eye (Select), the user can access the following menus. SETUP MENU Adjust the basic characteristics of your Entertainment Machine. Trilingual Menus 24 Pick the language (English, French, Spanish) that you want the on-screen menus to appear in. Signal 15 Specify the type of incoming Signal Source (Antenna or Cable) for the Antenna/Cable 1 jack.
On-Screen Menus/Displays Overview Menu Name Page Menu Description VIDEO MENU 38 Adjust your picture for any viewing situation. Your options are: Contrast, Brightness, Color, Tint, Sharpness, Reset and Advanced Settings: Light Sentry, Auto Flesh, Weak Signal, Color Temperature: Cool, Medium, Warm. AUDIO MENU 39 Customize the sound to suit your room and your taste.
Trilingual Menus SEL Press select to set SEL SETUP SPECIAL VIDEO AUDIO THEATER SETUP Trilingual Menus English Trilingual Menus English Signal Francais Signal Francais Scan Español Scan Español Channel Add/Del Channel Add/Del Channel Review Channel Review Clock Set Clock Set HD Focus HD Focus Picture Formats Menu Picture Formats To Menu Bar To Exit Quit Menu To Menu Bar Press select to set SEL To Exit Quit vcr cable dvd hd/stb tv SETUP light source Trilingual Menus
Channel Add/Del (Delete) Press select to set SEL SEL SETUP SPECIAL VIDEO AUDIO SETUP THEATER Trilingual Menus Trilingual Menus Signal Signal Scan Channel 03 Channel Scan Channel Add/Del Add Channel Add/Del Channel Review Erase Channel Review 03 Add Erase Next Channel Clock Set Clock Set Ch Ch HD Focus HD Focus Or # Keys Picture Formats Picture Formats Menu To Menu Bar To Exit Quit Menu To Menu Bar Press select to set SEL To Exit Quit vcr cable dvd hd/stb tv SETU
Channel Review SEL SEL SETUP SPECIAL VIDEO AUDIO THEATER SETUP SPECIAL Trilingual Menus VIDEO AUDIO CHANNEL REVIEW Ant 1 Ch Id Scan Lock 1 **** ON ON 2 **** - - - - Channel Add/Del 3 **** - - - - Channel Review 4 **** - - - - 5 **** - - - - 6 **** - - - - HD Focus 7 **** - - - - Picture Formats 8 **** - - - - Signal Scan Clock Set Menu To Menu Bar To Exit Quit Menu To Menu Bar Review channel settings on your Entertainment Machine To Exit Quit vcr
Clock Set TO SET TIME SEL SEL SETUP SPECIAL VIDEO AUDIO SETUP THEATER Trilingual Menus Trilingual Menus Signal Signal Scan Scan Channel Add/Del Channel Add/Del Channel Review Channel Review Clock Set Clock Set HD Focus HD Focus Picture Formats Picture Formats Menu To Menu Bar 12 : 00 Am May 02 2002 To Exit Quit Menu To Menu Bar To Exit Quit Set the clock on your Entertainment Machine vcr cable dvd hd/stb tv light source 1 Use the UP/DOWN arrow to choose Clock Set.
HD Focus SEL SETUP SPECIAL VIDEO AUDIO THEATER Press the Select Button on Trilingual Menus Signal The Remote Control To Begin Scan Channel Add/Del The Alignment System Channel Review Clock Set Begin HD Focus Picture Formats Menu To Menu Bar To Exit Quit vcr cable dvd hd/stb tv Let your Entertainment Machine adjust the color convergence automatically light source power mode 1 2 3 4 Press the MENU button on your remote to access the Setup menu. Use the UP/DOWN arrow to choose HD Focus.
Picture Formats SEL Press select to set SEL SETUP SPECIAL VIDEO AUDIO THEATER SETUP Trilingual Menus Picture Formats Aspect Style Signal Ant 1 Normal Wide Zoom Panorama +4 HDTV SDTV/DVD 1080i 540p Scan Channel Add/Del V. Position Comp. Color Type Channel Review Clock Set HD Focus Video Display Picture Formats Menu To Menu Bar To Exit Quit Menu To Menu Bar vcr cable dvd hd/stb light source power mode 1 Choose the source you want to set the picture format for.
Channel Labels To Change Letter SEL SEL SETUP SPECIAL VIDEO AUDIO THEATER SPECIAL Channel Labels Channel Labels Ch 03 Source I D XXXX Ch Labels Favorite Channels Parental Control ESPN Reset Security Timer Ch Background HBO NBC Next Ch Captions ABC CBS Custom Ch SHOW Or #Keys Menu To Menu Bar Menu To Exit Quit To Menu Bar To Exit Quit To Change Letter SEL SEL SETUP SPECIAL VIDEO AUDIO THEATER SPECIAL Channel Labels Channel Labels Ch 03 XXXX Ch 03 Ch Labels XXXX Ch
Source ID SEL Press select to set SEL SETUP SPECIAL VIDEO AUDIO THEATER SPECIAL Source I.D. Channel Labels Source I D IN 1 IN 2 Favorite Channels IN 3 Parental Control Source List Security Timer Custom Captions Reset Background Menu To Menu Bar Menu To Exit Quit IN 5 IN 4 VCR 1 CD DVD TAPE LD AUX To Menu Bar To Exit Quit Press select to set SEL SPECIAL Note: When you label Input 1, Input 2, etc. the TV will automatically change to the source of the last source labeled.
Favorite Channels SEL SEL SETUP SPECIAL VIDEO AUDIO THEATER SETUP Channel Labels SPECIAL VIDEO AUDIO THEATER Favorite Channels Source I D MOVIES SPORTS NEWS Favorite Channels Parental Control Security Timer Caption/Text Background Menu To Menu Bar To Exit Quit Menu To Menu Bar To Exit Quit SEL SEL SETUP SPECIAL VIDEO AUDIO SETUP THEATER SPECIAL VIDEO AUDIO THEATER Favorite Channels MOVIES SPORTS Favorite Channels NEWS MOVIES SPORTS NEWS 6 Menu To Menu Bar Menu
Parental Control Overview Overview Parental Control offers the user a wide variety of options and settings that restrict or “block” the programming that can appear on the TV. Parental Control allows the user the capability of defining which program rating they consider acceptable, to the younger or more sensitive viewer. It can be preset and turned either on or off by the user who specifies the secret 4-number code, the password.
Parental Control Setup Press select to set SEL SEL SETUP SPECIAL VIDEO AUDIO SPECIAL THEATER Parental Control Channel Labels **** Enter Secret Code Source I D Channel 03 Favorite Channels Video Lock Parental Control Quick Lock Front Panel Lock Security Timer Movie Ratings Captions TV Ratings Background Canadian Ratings (Eng) Canadian Ratings (Frn) Menu To Menu Bar To Exit Quit Menu enter secret code Parental Control **** Menu To Menu Bar To Exit Quit Using Parental Control N
Security Timer Press select to set SEL SEL SETUP SPECIAL VIDEO AUDIO SPECIAL THEATER Security Timer Channel Labels 1 Source I D 2 3 4 - - : - - Am TV On Favorite Channels - - : - - Am TV Off Parental Control Mon (Day of Week) - - Channel Security Timer Once Captions Daily Background Weekly Off Menu To Menu Bar To Exit Quit Menu To Menu Bar To Exit Quit Use the Security Timer to program your TV to turn on, tune to the preset channel, and then turn off automatically at the tim
Captions SEL Press select to set SEL SETUP SPECIAL VIDEO AUDIO THEATER SPECIAL Captions Channel Labels Source I D Display Favorite Channels Parental Control Captions To Menu Bar On C. C. Text 1 2 Auto Channel Background Menu Off Mode Security Timer To Exit Quit Menu To Menu Bar Set the Caption/Text options for your Entertainment Machine To Exit Quit vcr cable dvd hd/stb tv light source 1 Press MENU and the RIGHT/LEFT arrow button to access the Special Menu.
Background Press select to set SEL SEL SETUP SPECIAL VIDEO AUDIO SPECIAL THEATER Channel Labels Channel Labels Source I D Source I D Favorite Channels Favorite Channels Parental Control Parental Control Security Timer Security Timer Captions Captions Background Background Solid Solid Shaded Shaded Menu To Menu Bar To Exit Quit Menu To Menu Bar To Exit Quit vcr cable dvd hd/stb tv light source Select Solid or Shaded for the menu backgrounds 1 Press MENU and use the RIGHT/L
Video Menu SEL Press select to set SEL SETUP SPECIAL VIDEO AUDIO VIDEO THEATER Contrast 75 % Brightness 50% Color 50% Advanced Settings Light Sentry Auto Flesh Weak Signal Tint Color Temperature Sharpness 50% Cool Reset Medium Advanced Warm Settings Menu To Menu Bar To Exit Quit Menu To Menu Bar To Exit Quit Customize the picture appearance 1 Press MENU and the RIGHT/LEFT arrow button to show the Video Menu. 2 Use the UP/DOWN arrow to choose one of the following options.
Audio Menu SEL SEL SETUP SPECIAL VIDEO SETUP AUDIO THEATER Bass 75 % Treble 50% Balance 50% SPECIAL VIDEO AUDIO THEATER Advanced Settings Stereo Mono Second Audio Program Reset Advanced Internal Speakers Settings Auto Noise Cancel Loudness SoundRite Menu To Menu Bar To Exit Quit Menu To Menu Bar To Exit Quit Customize the sound to your preference vcr cable dvd hd/stb tv 1 2 Press MENU and use the RIGHT/LEFT arrow button to access the Audio Menu.
Theater Modes Menu SEL Press select to set SEL SETUP SPECIAL VIDEO AUDIO THEATER THEATER Theater Modes TV Theater Modes Surround Movies Surround SRS Music BBE Sports Reset Menu To Menu Bar To Exit Quit Menu To Menu Bar To Exit Quit Set Theater Modes to your preference vcr cable dvd hd/stb tv 1 Press MENU and then the RIGHT/LEFT arrow button to access the Theater menu. 2 Press DOWN arrow button to access the Theater Modes or Surround.
POP-3 (Picture-On-Picture) Overview 10 11 12 vcr cable dvd hd/stb tv light source power mode Main Picture 206-3711 cable dvd hd/stb aspect 1 2 3 4 5 6 7 8 9 0 display With the TV on and Ant 1 source shown on-screen, press MULTI on the remote to turn on the POP-3 feature. POP-3 shows three additional channels on the right side of the screen. The multi-channel display also includes the channel number for reference.
Split Screen Overview and Setup vcr cable dvd hd/stb tv light source Original Channel Additional Channel mode Split Screen shows two live tunable channels on the screen at the same time 1 With the TV on and Ant 1 source shown on-screen, press SPLIT on the remote to turn on the Split Screen two-channel viewing feature. 2 Press PIP CH to switch channel tuning to the additional channel. 3 4 Tune to a channel for the additional channel picture.
Programming the Remote Program your remote to operate a variety of Audio/ Video devices Indicator Lights 1 On the next two pages are the Name Brand Product Programming Codes, find the type of device you’re programming and then find the brand name. Write down the three-number codes. 3 Push the mode key with the name of the device you’re programming (VCR, CABLE, DVD, HD/STB). 4 Hold down the mode key (VCR, CABLE, DVD, HD/STB) until the indicator light turns on, continue holding down the mode key.
Programming Codes TVs Daewoo . . . . . . . 149 TV/VCR Combination Codes Funai TV/VCR. . . . 154 Zenith . . . . . . . . 101 121 149 152 Adventura TV/VCR . 154 Goldstar TV/VCR . . 153 172 Daewoo TV/VCR . . 148 Symphonic TV/VCR 154 Zenith TV/VCR . . . 150 152 153 154 172 VCRs Admiral . . . . . . . 261 Akai . . . . . . . . . . 292 717 718 719 720 General Electric . . 216 220 266 282 701 702 725 Orion . . . . . . . . . 250 Sears . . . . . . . . . 211 212 213 265 274 Go Video . . . . . . .
Programming Codes Satellite Receivers Alphastar. . . . . . . 516 Hughes Network . . 514 RCA . . . . . . . . . . 510 517 Toshiba . . . . . . . . 509 512 Chaparral . . . . . . . 501 502 JVC . . . . . . . . . . 518 Realistic . . . . . . . 506 Uniden . . . . . . . . 522 Cheyenne. . . . . . . 502 Macom . . . . . . . . 314 Sierra I . . . . . . . . 502 United . . . . . . . . 344 Dishnet . . . . . . . . 515 Magnavox . . . . . . 521 Sierra II . . . . . . . 502 Zenith Drake. . . . . 312 330 Drake . .
Remote Operating Mode Key Functions A list of key functions by mode for your remote control KEY NAME source light power tv vcr cable dvd hd/stb aspect 1 2 3 4 5 6 7 8 9 0 display mute volume (up) volume (down) channel (up) channel (down) flashbk split multi pip ch c skip sleep cc PAGE 46 TV Mode VCR Mode Cable Mode DVD Mode HD/STB Mode TV Sources Lights Keys 5 Seconds TV On/Off Selects TV Selects VCR Selects Cable Selects DVD Selects HD/STB TV Sources Lights Keys 5 Sec VCR On/Off Selects TV Select
Remote Operating Mode Key Functions KEY NAME TV Mode VCR Mode Cable Mode DVD Mode HD/STB Mode TV Favorite Channels TV Menu Quit TV Select Up TV Select Down TV Adjust Left Favorite Channels TV Adjust Right Favorite Channels TV Menu Item Select TV Menu VCR VCR VCR VCR VCR Cable Page Down Cable Quit Cable/Sat Up Arrow Cable/Sat Down Arrw Cable/Sat Left Arrow N/A DVD DVD DVD DVD N/A HD/STB HD/STB HD/STB HD/STB theater record stop I<< skip skip >>I pause rew (rewind) play ff fav ch (Channel) quit up
Maintenance Routine TV cabinet and screen cleaning Careful and regular cleaning can extend the the useful service life of the TV. Be sure to turn the power off and pull out the plug before you begin any cleaning. Screen Cleaning 1. Here’s a great way to keep the dust off the screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen. 2.
Troubleshooting Some quick and easy tips to resolving problems Symptoms Possible Cause(s) Possible Solution(s) See page(s) No Power. • AC Power Cord not connected. • Local power failure? -Connect power cord. Try a different power outlet. -Contact power company for information. No Source image. • Source turned off. • Source not selected. -Turn Source equipment on. -Use SOURCE to choose correct picture and sound source. • Wrong time set. -Set clock to correct time.
Troubleshooting (Continued) Some quick and easy tips to resolving problems Symptoms Cause(s) Possible Solution(s) Page(s) • Wrong mode selected. • Not aimed at remote sensor. • Remote too far from TV or too much light in room. • IR path to TV interrupted. • Weak batteries. • Wrong battery polarity. • Mode switch takes 3 seconds. • Product Mode not programmed. • Product not IR controlled. -Press correct mode key to change mode (TV for TV operation.) 17 -Point remote at Front Control Panel.
Troubleshooting (Continued) Symptoms Cause(s) Possible Solution(s) Page(s) • • • • • • -Make sure the TV sound is not muted. -The problem may be the broadcast, not your TV. -Install the Audio cables correctly. -Install external amplifier cables correctly. -Turn internal speakers on in the Audio menu. -If the Audio Mode is set to SAP, the channel may not have an SAP program. 17 17/21 6 - 14 14 39 17/29 Sound/Audio Problems Normal picture but no sound. Check volume levels. Try another channel.
Glossary A list of definitions for some of the words found in this guide 75 OHM RF CABLE The wire that comes from an off-air antenna or cable service provider. The end looks like a hex-shaped nut with a wire sticking through the middle. It screws onto the threaded jack on the back of the TV. 300 TO 75 OHM ADAPTER A small device that connects a two-wire 300 ohm antenna to a 75 ohm RF jack.
Notes 206-3594 PAGE 53
Notes PAGE 54 206-3594
Notes 206-3594 PAGE 55
Zenith Electronics Corporation Rear Projection TV Limited Warranty-USA Zenith will repair or replace your product, at Zenith’s option, if it proves to be defective in material or workmanship under normal use, during the warranty period listed below from the date of original consumer purchase. This warranty is available only to the original, end user purchaser of the product and effective only when used in the United States, excluding U.S. Territories.
