Manual

REMOTE CONTROL MODEL SC3820
TV AND VCR OPERATIONAL NOTES
Some controls on the remote, like PLAY and VOLUME
will always operate the VCR or the TV. Whether other keys
operate the TV or the VCR depends on the mode of the
remote control. For example, OFF-'ON will turn the VCR
()N and OPT while the remote control is in the VCR mode.
litwill turn the TV ON or OFF while the remote control is
in the TV mode.
Some of the functions provided by this remote control may
not be part of your TV and/or VCR. You wiJ/!not be able to
activate those functions even though there is a control but-
ton on the remote. For example, pressing TIMER provides
direct access to the Sleep Timer on many TVs. I:[your TV
does not have a Sleep Timer, pressing TIMER has no effect.
PREPARATION FOR USE
Batteries are provided with this remote, but you must install
them before using the remote.
INSTALLING BATTERIES
When the effective operating range of your remote becomes
noticeably shorter, replace the batteries with two (2) high
quality, alkaline, sik_eAAA batteries.
1. Remove the battery compartment cover, PUSH
DOWN tab and PULL OUT from top.
2. Insert new batteries as indicated in the diagram
inside the compartment.
3. Replace the cover by inserting the tab on the bottom
of the cover into its housing. Snap the cover into
position.
NOTES:
• Be carefid not to place heavy objects on top of the remote
control buttons. Prolonged accidental operation of the
remote control will shorten battery life.
• If you do not use the remote control for a month or more,
remove the batteries. 13a_Iteryleakage can €_ausedamage
to the remote control.
• Zenith is not respon_.ible for damage: caused by such
battery leakage.
0 1 m
zs_B 7 -- 3