Manual

ON-SCREEN MENUS
BASIC MENU OPERATIONS
Vertical Control Panel Shown
(Menu buttons are provided
on some remote controls.)
1. To See a Menu or Change Menus
Press MENU repeatedly until the desired menu is
shown. Example shows choosing the SETUP Menu.
-- > AUTO CH. SEARCH
CH, ADD/DEL
TUNING BAND
AUTO FINE TUNE
CLOCK SET
CAFrIONS
J
Choosing Setup Menu
2. To Select an Option/Feature on a Menu
Press SELECT (SEL) repeatedly until the desired
option/feature is highlighted. Example shows
selecting CLOCK SET.
AUTO CH. SEARCH
CH. ADD/DEL
TUNING BAND
AUTO FINE TUNE
- > CLOCKSET
CAPTIONS
J
Selecting Clock Set
o
To Access an Option/Feature for Adjustment
Press ADJUST (ADJ) Left/Right to access the
selected option/feature to see its submenu or status
display. Follow the instructions shown in the dis-
play. In :most cases, you simply press ADJUST
(ADJ) Left/Right a second time to adjust the ac-
cessed option/feature. You still see the status of the
item change in the display.
NOTE: :Do not change channels during menu
operations unless instructed to do so in the proce-
dures given in this operating guide.
f -,--,
CI_3CK SET
J
PRESS NUMBERS
OR ADJUST KEYS
Clock Set Display
4. To Access a Different !Vlain Menu
Press MENU repeatedly until the desired menu is
shown.
5. To Return to Normal Viewing
Press ENTER (ENT) or wait a few seconds and the
TV will return automatically to normal operation.
Service Menus: In addition to the menus shown above,
there are menus for factory attd field servichag. Service
menus are not intended for use by the ownez.
If you inadvertently access a service menu, press ENTER
(ENT) to return immediately to normal TV viewing.
2s_A 8 -- 2