Manual

THE FIRST TIME YOU OPERATE YOUR TV
STEP 1. CONNECT THE POWER
i ®
_=
Plug your "IV into an unswitched AC power source.
The switched AC outlets found on some video equipment
will not continue supplying power to the TV once the equip-
ment is turned off. If the power to the TV is interrupted,
you will have to set the clock in the TV to the current time.
Do not plug TV into switched outlet on cable-TV decoder
Do not plug TV into .,;witched outlel_on a VCR
STEP 2. TURN TV ON
Turn the TV on by pressing OFF-ON.
STEP 3. USE AUTO SEARCH
When your TV is first powered up you will see the AUTO
CH. SEARCH reminder display. AUTO CH. SEARCH
finds all available channels and stores them in memory for
access by CHANNEL (CH) Up/Down. To activate AUTO
CH. SEARCH, press ADJUST (ADJ) Left/Right. When
the search is complete, you can watch the TV program of
your choi_.
NOTES:
1. The AUTO CH. SEARCH reminder display ap-
pears each time you turn on your TV until it has
been u,;ed at: least once.
2. Antenna or cable must be connected to TV before
you use AUTO CH. SEARCH.
AUTO CH. SEARCH
PRESS ADJUST
KEY TO START
SEARCHING FOR CHANNELS
_,lYrO CH. SEARCH HAS COMPLEIEE,
TUNING BAND IS
[-_ CHANNEL_ FOUND
CH2
Auto Ch. Search While Searching for When Search is
Reminder Display Active Channels Complete
.J
When Returning to
Channel Display
STEP 4. USE OTHER OPTIONS
You may want to consider using the following options:
• Program the channels accessed by using CHANNEL
(CH) Up/Down. Refer to CH. ADD/DEL option of the
"Setup Menu" section of this operating guide for details.
Set the clock in the TV. Refer to the CLOCK SET option
of the "Setup Menu" section of this operating guide for
details.
25rvo 2 -- 1