Instruction manual

3275-A
PAGE 22
ON-SCREEN MENUS AND DISPLAYS
Trackball Menu
To access the Trackball menu, press TV. Press down on trackball to place cursor on HD Display screen. Rotate trackball to
move cursor to left/center of HD Display screen to show the Trackball menu. Rotate trackball to move cursor to menu
option; the data rectangle at the bottom of the screen will display the status of the selected menu option. Press down on
the trackball to change currently selected option.
Status, identifies the format used with the currently selected
source (Video, S-Video, RGB).
Copy, transfers setup information to another format.
Sleep Timer, changes Sleep Timer status to 0:15, 0:30, 1:00,
1:30, 2:00, 2:30, 3:00, 3:30, 4:00, or Off.
Note: Sleep Timer turns HD Display Off after a preset time.
Z-Trak, changes trackball cursor speed to slow, medium, or fast.
Store, saves format used with current source. This option
appears only if the format was not previously stored.
Source/Time Display
To access the Source/Time Display, press TV. Press down on trackball. Rotate trackball to move cursor to right of HD
Display screen to show Source/Time Display.
Data Rectangle
Source/Time Display
Current Source
Signal Standard
Time (if clock is set)