Instruction manual

PAGE 20 I OPERATION
This page showsa typical video system and explainshow to select channels.
ALL-ChanneL,
Antenna
_bLe W
W_ck-- DirectCabLe Or
Typical
Ca_ Box
From Or _
System , _ Czo_tleprtx
to VCR
ZenithSteteo VCR
CHANNEL
3_4
AUDIO VIDEO
VHFAJH_CATV OUT OUT
?TI
>
Zenith W
VHF-UHF
r_ C_ IN
VCROutputto 13/
(fhJnneL 3 or 4 when
'_R is on and W/VCR
Ip
Audio/Video Output to W
VIDEO AUDIO
IN IN
Selecting Channels when the VCRis OFF
1, Turn1Von.
2. Select channel_you'dUke to watch at the TV.If you have
a cable box, select channel 3 or 4 at the TV. Select cable
box channels at the cable box.
Selecting Channels at the TV when VCRis ON
1, TurnTVandVCRon,
2. PLaceVCR inTVmode by pressingthe TV/VCRbuttonon
the remotecontrol repeatedly until the VCRindicator
disappearsfrom the front pane[ of the VCR.
3. Select channeI.you'dI.iketo watch at the TV.If you have
a cable box, select channel.3 or 4 at the W. SeLectcable
box channeLsat the cab[e box.
Selecting Channels at the VCRwhen VCRis ON
1. TurnTVandVCRon.
Z. PLaceVCR inVCR mode by pressingtheTV/VCRbuttonon
the remotecontrol,repeatedlyuntil,theVCR indicator
appearsinthefrontpanel,oftheVCR.
3. Select channels3 or 4 at the TV. If yourTV is equipped
with A/V input jacks, checkyour TVoperating manual,to
select the A/V sourcefor a better picture.
4. SelectthechanneI.you'dl.lketo watchat theVCR.Ifyou
havea cablebox,sel.ectchannel.3 or4 attheVCR.
Selectcabl.eboxchannelsatthecablebox.