Instruction manual

OPERATION I PAGE 21

This page describeshowto connecta camcorderto your VCR.

Back Panel of Stereo VCR

VIDE_)_

LIT VHF/UHF/CATV

A/V cable is not provided with VCR.

Turn off poweror unplug VCR

before making any connections.

Select AUX for Viewing an Audio/Vldeo source like a

Camcorder

1. With TV and VCRon, pLaceVCRin VCRmode by pressingthe

1V/VCRbutton on the remote (and repeat) until the VCR

indicator Lightappears in the VCR'sfront paneL.

2. SeLectchanneL3 (or 4) on the TV.Note: If your TV hasA/V

jacks, you mayget a better picture if you connect your VCR

there. (Then, select the A/V source on the TV.)

3. At the VCR,ChanneLdownLowerthan the lowestchannel (or

ChanneLup above the highest)to select "AUX" You canalso

choose the SETUPmenu as described in "How to Access

Menus"on page 9.

Press3 for the SETUPmenu's SOURCEitem.

Press3 for AUX,then ENTER.(PressQUIT to exit.)

SETUPMENU

SOURCE:TUNER(TV)

.CA V

Press number keys

then ENTER QUIT = exit

Press 3 to select AUX

Items in the Menu

SOURCE Showsthe programsource--W, CATV,or AUX--setectedfor the VCRto receive.

TUNER TheVCRis using its Tunerto receive programsfrom an antenna or cabLe.

TV SeLectsprogramsfor the VCRfrom a rooftop-type antenna.

CATV SeLectsprogramsfor the VCRfrom CabLeTV.

AUX Selects programsfor the VCRfrom the R-AUDIO-L--VIDEOIN jacks (where you may have connected your

camcorder).