Instruction manual

OPERATION I PAGE 25
Recordingusing presettime periods.
Preset Time Periods for ITR Recording.
Note:
Presetrecording Ume counts down unULthe recording time
iS over.
Instant (attended) Timer Recording (ITR) Lets you record for
a specific preset time period, instead of recording until the
end of tape is reached. For example, you can record a
30-mlnute show using the preset time period.
TurnTVand VCRon.
PlaceVCRin VCRmode by pressingthe TV/VCR
button on the remoterepeatedlyuntil the VCR
indicatorLight appearsin the VCRfront panel.
Select channel3 or 4 at the lV. If you have
connectedyour VCRto the TV'sA/V input jacks,
selectthe A/V sourceat the TVfor a better
picture.
Selectthe channelto be watchedand recorded
at the VCR.If you have a cable box, selectthe
cable box output channel (usually3 or 4) at the
VCR.Selectcable box channelsat the cable box.
Insert a VHScassettetape into the VCR.
PressSP/EPto selectrecording speed,if desired.
Recordingspeedis alwaysSP,unlessyou select
EP.
Note: The SP mode determineshow much tape is
Left and switchesspeedfrom SPto EP,if
necessaTy,to completerecording the program.
Therewill be somepictureand sounddistortion
at the point of the speedchange.
PressREC/ITRuntil recordingbegins.The REC
indicatorLightappearsin the VCRfront panel.
Recordingcontinuesuntil you reachthe end of
the tape, or until you press STOPto stop
recording.
PressREC/ITRrepeatedlytoselecta preset
recordingtimeperiod.Eachsubsequentpressof
REC/ITRincreasestherecordingtimeby 30
minutesuntilyou reacha maximum of4 hours.
power
©
Remote'sControls
power sp/ep recAtr stop/eject
000@
VCR'sControls
Pressesof Preset Time For
REC/ITR Display Recordin9
I (Press) Current Time Until end of tape
2 0:30 30 minutes
3 1:00 1 hours
4 1:30 I hour and
30 minutes
5 2:00 2 hours
9 4:00 4 hours
10 Nodisplay normal recording