Instruction manual

PAGE 26 I OPERATION
Recording one show white watching another.
Note:
If you havea cable boxconnectedto your VCR,you cannot
record one showand watch another.
Choosethe showyou wishto recordusingthe VCR'schannel
selector.Choosethe showyou wishto watch usingthe W's
channelselector.
TurnTVand V[R on.
B
Place VCRin VCRmode by pressingthe TV/VCR
button on the remote repeatedlyuntil the VCR
indicator tight appearsin the VCRfront paneL.
SeLectchannel 3 or 4 at the TV.If you have
connected your VCRto the TV'sA/V input jacks,
selectthe A/V sourceat the TVfor a better
picture.
SeLectthe channelto be watchedand recorded
at the VCR.tf you have a cable box, select the
cable boxoutput channel (usuaLLy3 or 4) at the
VCR.Select cable box channelsat the cable box.
D Insert a VHScassettetape into the VCR.
PressSP/EPto selectrecordingspeed,if desired.
Recordingspeedis alwaysSP,unlessyou select
EP.
m
PressREC/[TRuntil recordingbegins. REC
indicator tight appearsin the VCRfront panel..
Recordingcontinuesuntil you reach the end of
the tape, or until you pressSTOPto stop
recording.
PLaceVCR inW mode by pressingtheW/n_CR
buttonon remoteto turnoffVCR indicatortight
inthe VCR frontpanel..
Setecttheshow you wishtowatchusingthe
W's channelselector.
power
Remote's ControLs
pow_ sp/ep rec/itr stop/eject
000@
VCR'sControls
Options You Can Use White Recording
Xnstant Recording
until,end of tape)
PAUSE-
iMomentariLy pausesrecording.PressPAUSEagain to
resumerecording.
I
!STOPor STOP/F..3ECr-
Stopsand exits recordingmode.
Note=
To returnto the showyou'rerecording,select channel 3 or 4
at the TV. PLacethe VCRin the VCRmodeby pressingthe
W/VCR button on theremoteto show theVCRindicator
tightintheVCR'sfrontpanel.