Owner`s manual

h. NETWORK SETTING
Use NETWORK SETTING to determine network settings or to test the network.
This product does not use the network function. You must use the following factory
settings.
NETWORK TYPE: MAIN
MAIN NETWORK: No need to set.
The following information is displayed on this screen.
NETWORK TYPE: Sets the type of network to use.
MAIN NETWORK: Sets the onboard LAN.
NETWORK TEST: Performs a network test.
Move the cursor to EXIT and press the TEST Button to return to the System Test
Menu screen.
NETWORK SETTING
NETWORK TYPE MAIN
MAIN NETWORK
NETWORK TEST
EXIT
SELECT WITH SER VICE AND PRESS TEST
->
NETWORK SETTING
DHCP XXXXXXXX
IP
ADDRESS
XXX.XXX.XXX.XXX
SUB NET MASK
XXX.XXX.XXX.XXX
GATEWAY
XXX.XXX.XXX.XXX
PRIMARY DNS
XXX.XXX.XXX.XXX
SECONDARY DNS
XXX.XXX.XXX.XXX
EXIT
->
SELECT WITH SER VICE AND PRESS TEST
NETWORK SETTING Screen
NETWORK TEST Screen
NETWORK SETTING
STATUS XXXX
CHECKING XXX%
DHCP --------- XXXX
LOOPBACK--- XXXX
GATEWAY----- XXXX
SERVER------- XXXX
PRESS TEST TO EXI T
Select a category on the NETWORK SETTING (Setting Menu) and the following screen will be displayed. However, since this product does not use network
function, this manual does not contain instructions for performing network settings or tests.
9-3 GAME TEST MODE
Opens the Game Test Mode, allowing game specifi c settings and tests to be performed. This option will be displayed in grey until preparations are complete.
Select the Game Test Mode option then perform the exit to begin the game test.
Among the settings in Game Test Mode, the following settings become effective as listed below, rather than in the same way as System Test
mode settings.
- Changes in GAME ASSIGNMENTS are effective after selecting EXIT on the GAME ASSIGNMENTS screen.
- Changes in GUN CALIBRATION SETTING and GUN SPEED SETTING are effective after pressing the TEST Button on the confi rmation
screen.
Game Test Mode allows game settings to be altered, Control Units (Guns) to be calibrated
and game data to be checked.
Select GAME TEST MODE from the System Test Menu screen to display the Game Test
Mode screen as follows.
Use the SERVICE Button to move the cursor to the desired test item. Press the TEST Button
to enter the selected item’s test.
Performs test, adjustments and settings for each of the Game Test Mode screen items below.
a. INPUT TEST: Tests each input device used in the game.
b. OUTPUT TEST: Tests each output device used in the game.
c. GAME ASSIGNMENTS: Adjusts game settings.
d. GUN CALIBRATION SETTING: Performs sight settings for the game’s gun.
e. GUN SPEED SETTING: Sets the speed volume for the game’s gun.
f. BOOKKEEPING: View all recorded game data.
g. BACKUP DATA CLEAR: Erase all game records.
After selecting an item, read the explanations below regarding operation.
After performing tests and adjustments, return to the Game Test Mode screen, select EXIT
and press the TEST Button. You will return to the System Test Menu screen.
Move the cursor to EXIT on System Test Menu screen and press the TEST Button to
return to the Game Play screen.
GAME TEST MODE
INPUT
TEST................................. a
OUT PUT
TEST............................. b
GAME ASSIGNMENT...................... c
GUN CALIBRA TION SETTING.......... d
GUN SPEED SETTING.................... e
BOOKKEEPING............................. f
BACKUP D ATA CLEAR.................... g
EXIT
SELECT WITH SER VICE AND PRESS TEST
->
26