Owner`s manual

12-1 BILLBOARD FLUORESCENT LIGHT (52”/62”DX)

1) Turn the power off.

2) Use the enclosed Tamper screws wrench (L-wrench) to remove the 5 washers

and screws. The screws use a design washer. Make sure you do not lose these

parts.

3) Remove the billboard plate. The bottom of the billboard plate is inserted into

the cabinet. Lift it diagonally upwards to remove it.

4) Change the ﬂ uorescent light.

FLUORESCENT LIGHT 48" 40W

PHOTO 12.1d

Tamper

screw

12-2 HOLSTER FLUORESCENT LIGHT

The lighting units on the front right and left sides of the HOLSTERS use a ﬂ uorescent light.

1) Turn the power off.

2) Take off 4 screws to open the back plate of holster.

BACK PLATE

PHOTO 12.2a

PHOTO 12.2b

FL LAM

STARTER

BALLAST

9" 5WATT

DESIGN WASHER

CTF-1002

PHOTO 12.1b

PHOTO 12.1c

HEXAGONAL SCREW (5)

PHOTO 12.1a

Tamper screw & Washers (5)