Owner`s manual

CUSTOMER HANDBOOK
15
I
Self-Installation
Self-Installation
| CONTINUED
(located on back
of VCR or
DVD Burner)
(located on back of TV set)
CABLE/ANTENNA
1. Connect the single end of the 2-way splitter to your
wall cable outlet.
2. Connect one COAXIAL CABLE from the splitter on
your wall cable outlet to the CABLE IN jack on the back
of the Digital Cable box.
3. Connect the other COAXIAL CABLE from the splitter
on your wall cable outlet to the ANTENNA IN on the
back of your TV.
4. Connect each of the color-matched ends of the red-
white-yellow RCA CABLE to the color corresponding
AUDIO/VIDEO OUT jacks on the back of the Digital
Cable box.
5. Connect the opposite ends of the RCA cable to the
color corresponding INPUTS on the VCR (or DVD
BURNER).
6. Connect the 2nd RCA Cable in the same manner from
the OUTPUT JACKS on the back of the VCR (or DVD
BURNER) to the INPUTS on the back of the TV.
7. Make sure the Digital Cable box, VCR (or DVD
BURNER) and TV are plugged into the wall power
outlet and turned on. Select LINE INPUT (aka VIDEO
INPUT, L1, AUX) on the back of the VCR (or DVD
BURNER) and select VIDEO INPUT on the TV.
8. When you plug in the Power Cord the Digital Cable box
signals Time Warner Cable to begin the registration
process. Note: do not disconnect the Cable Input
or the Power during this process. The process is
complete when you see the TIME displayed on your
Cable box.
9. After the TIME display appears on the Cable Box, turn
on the TV and Digital Cable box (see green power
indicator light) then call 1-888-TW-CABLE to activate
your box. Follow the voice prompts.
Please Note: While recording a channel on the VCR
or DVD, you are able to watch any ANALOG
CHANNEL(2-76) by switching to the antenna input on
the TV.
TV WITH VCR OR (DVD BURNER)
DVR SELF-INSTALLATION
TYPICAL CONNECTION INSTRUCTIONS
1. Connect the coaxial cable from your wall cable outlet to the CABLE IN jack on
the back of the DVR Cable box.
2. Connect each of the color-matched ends of the yellow/red/white RCA cable
to the corresponding OUTPUT jacks on the back of the DVR box. Connect the
opposite ends of the RCA cable to the corresponding INPUTS on the television.
3. Select the corresponding input from the television’s Video Input menu.