Owner`s manual

CUSTOMER HANDBOOK
16
Self-Installation
I
Self-Installation
| CONTINUED
1. Connect the coaxial cable from your wall cable outlet to the
CABLE IN jack on the back of the HD DVR Cable box.
2. Connect each of the color-matched ends of the red/green/blue
RCA cable to the corresponding HDTV OUTPUT jacks on the back
of the HD DVR box. Connect the opposite ends of the RCA cable
to the corresponding HDTV INPUTS on the HD television.
3. Connect each of the color-matched ends of the red/white
RCA cable in the same manner from the AUDIO OUTPUT
jacks on the back of the HD DVR to the corresponding HDTV
AUDIO INPUTS on the back of the HD television.
STANDARD HD DVR SELF-INSTALLATION
TYPICAL CONNECTION INSTRUCTIONS
Some 4x3 aspect ratio TVs may display bars at top and bottom.
HD OR HD DVR SELF-INSTALLATION USING HDMI CABLE
TYPICAL CONNECTION INSTRUCTIONS
HDMI cables (6’ or 10’) are available upon
request from Time Warner Cable.
1. Connect the coaxial cable from your wall cable outlet to the
CABLE IN jack on the back of the HD or HD DVR Cable box.
2. Connect the HDMI cable from the HDMI slot on the back of the HD
or HD DVR Cable box to the HDMI slot on the back of the HDTV.
3. Change Audio Settings to HDMI. Using your remote, go to
SETTINGS/AUDIO/AUDIO CODING and select HDMI.
OR
If your cable box has the number 4240, 4250 HDC, 8240 or
8300 HDC in the top right corner on the front, go to SETTINGS/
DEVICES/ AUDIO:DIGITAL OUTPUT and select HDMI.