Operation Manual

ZENNiOAVANCEYTECNOLOGÍA www.zennio.com

10
DISPLAY BRIGHTNESS (Figure 2.1)
¾ Always ON
: Light on the display remains always ON, even when the
page is not in use.
¾
Auto Dimming: 45 seconds after the last interaction on the
display, this will recover its stand-by mode.
o DIMMING LEVEL (Stand-by Mode)
¾ Off
: After 45 seconds (Auto Dimming), the own
auxiliary light on the display will remain OFF (until
a new touch on it is made)
¾
Minimum: After 45 seconds (Auto Dimming),
the display will light slightly, (this is useful to
identify it in dark places).
o DISPLAY STATUS WHILE DIMMING
¾ Display Active:
Display remains always active;
this means that any interaction with it will obtain an
immediate response.
¾ Display Locked (unlock with a single touch):
The
display needs a first touch onto it to be unlocked,
after this, this can be normally operated.
INDICATORS UPDATE WHEN INITIATING
When recovering the BUS voltage (or after a program download), the InZennio
Z38 may ask the rest of devices in the installation for their corresponding
values, in order to update the display indicators.
¾ Delay
: This field allows a user to set a delay (in seconds) to put off the
indicators update, until the rest of devices on the installation are
completely initiated.
WEEKDAY INITIALS
Seven free characters are available to enter the weekday initials.
Both the date and the week-day will appear on any page header, when the
“Time Zone” is pressed.