Operation Manual
ZENNiOAVANCEYTECNOLOGÍA www.zennio.com
12
TEMPERATURE SENDING PERIOD
This field is meant to set a period of time for the Z38 to send the registered
temperature to the BUS through the “Temperature-Internal Sensor value”
Communication object.
2.1.1. « DISPLAY BRIGHTNESS » OBJECT
The Z38 Panel has a Communication Object “Display Brightness” which has
the same effect than touching onto the display.
¾ When this object receives a “1” from the BUS, the display lights up and
gets active.
¾ A Display active implies that any interaction with it by the user will
always get an immediate response, regardless of the “Status while
Dimming” parameterized before. (See page 10)
Note:
When receiving a “0” nothing happens
Example:
This functionality allows a presence detector or a door
contact to send a “1” to the BUS notifying the user that someone
entered the room, or that someone got up during the night. When
receiving a “1”, the display lights up (either to welcome the user
entering the room or to let him see the display in the dark).
2.2. PAGES
This Manual section is intended to detail the different pages the InZennio Z38
provides the user, including the submenus offered in each of these pages.
When a Panel page is enabled, two parameterization fields become available:
NAME
Æ This field allow users to associate a name to any of the InZennio
Z38 pages; this name will appear on any of the page headers the user is moving
through (12 free characters are available to set the name).
Note:
The only page which cannot be renamed is the MENU one (to access
Specific Pages).
SECURITY
Æ A restricted page prevents unauthorized access to it. A 4 digits
password is required to enter a protected page.
The default password is “1234”