Operation Manual
ZENNiOAVANCEYTECNOLOGÍA www.zennio.com
16
• Indicator: This will inform users about the brightness
percentage applied at any time.
ICON Æ
An icon can be associated to the page box. (See Annexe II).
2.2.1.3. SHUTTER CONTROL
Specifically designed to control any type of shutters, blinds, sun blinds,
or any other drive. Through its communication objects, users will be
able to raise / lower shutters, and even knowing its exact position at any
time.
The basic shutter control is made as follows:
¾ Long Press: Move the shutter
• Raise Shutter:
“0” is sent trough the object “Move
Shutter”.
• Lower Shutter:
“1” is sent trough the object “Move
Shutter”.
Note: When the object “Move Shutter” sends “0” or “1”, the
shutter will start moving, and won’t stop unless the whole shutter
length is covered or that any other order is received.
¾ Short Press: Stop the shutter
To stop a moving shutter, a “0” or a “1” must be sent
through the object “Stop Shutter”.
ICON Æ
An icon can be associated to the page box. (See Annexe II).
INDICATOR Æ
By activating this parameter, users can insert an
indicator between both buttons to get a percentual estimation of the
shutter position.
2.2.1.4. CLIMA CONTROL
Configuring a box with the “Climate Control” function, a
SHORTCUT is created to some of the four available “Climate
Specific Pages”
TYPE OF CONTROLÆ
Choose the specific climate function to
control
• ON/OFF
• Set Temperature
• Mode (Heat/Cool)