Operation Manual

ZENNiOAVANCEYTECNOLOGÍA www.zennio.com

17
• Fan
• Blinds
• Special Mode (Comfort)
• Special Mode (Night)
• Special Mode (Out)
Note I: Depending on the selected option, a communication object
associated to the specific box will appear in the ETS environment;
the same object type corresponding the selected option.
This characteristic allows users to control also external climate
systems.
Note II: The Special Modes control from the “Home” & “Home II”
boxes is different from the control from the Clima “Specific Pages”, as
in this case, it will be necessary to use a different box (with a single
button) per mode to control
LINKED TO Æ
Users can associate this box with any of the 4
“Specific Pages” enabled as CLIMA.
For this association to work properly, it is necessary that the
mentioned Climate Specific Page is enabled.
ICON Æ
A couple of icons can be associated to the page box (See
Annexe II).
2.2.1.5. 1 BYTE CONTROL
This is a generic control to communicate all those devices susceptible to
be, by sending a single byte (value in the range 0….255)
TIPO Æ
: Three possible options available in this case:
¾ Fixed Value (one button, no indicator)
By pressing the button on the display, the same value will
always be sent; the value selected in the field “Value”.
¾ Percentage (2 buttons + indicator)
To send a percentage
Short Press: Rise or lower 1% with every short key
press.
Long Press: Rise or lower 10% with every long key
press
¾ [0….255] value (2 buttons + indicator)
To send values in the range [0...255].