Operation Manual

ZENNiOAVANCEYTECNOLOGÍA www.zennio.com



Short Press: Rise or lower one single point in the

range with every short key press.

Long Press: Rise or lower 10 points in the range with

every long key press.

Note:

Please notice that

Value 0 corresponds with 0%

………………………………….

Value 255 corresponds with 100%

ICON Æ

A couple of icons can be associated to the corresponding

display box. (See Annexe II).

2.2.1.6. SCENE CONTROL

Scenes or “lifestyles” consist of a synchronized activation of some

devices in the domotic installation, so that different predefined

atmospheres are generated.

There is an only Communication Object associated with “Scenes”. All

the scenes will be always sent through the object “[GN] Scenes”.

Before continuing with the parameterization of this type of control, a

small introduction to the Communication Object “[GN] Scenes” is

done next:



The DPT (Datapoint Type) Scene Control is a one byte Object with the

following format.

C 0 = Activate the scene corresponding the field Scene Number ≡N

1 = Learn the scene corresponding the field Scene Number ≡N

R Reserved field with value “0

N Scene Number Range [0…..63]