Operation Manual

ZENNiOAVANCEYTECNOLOGÍA www.zennio.com

21
CONTROL RANGE Æ Choose between 2 available options:

¾ Normal Æ
[10ºC…..30ºC]
¾ Extended Æ
[0ºC…..95ºC]
ICON Æ
A couple of icons can be associated to the screen box. (See
Annexe II).

Note:
Do not confuse the generic temperature control with the Climate
Control associated to the set temperature (See Section 2.2.1.4). The
generic Temperature Control can not be linked with any of the Climate
Specific Pages.
2.2.1.8. BINARY INDICATOR
This control enables a binary status indicator on the display box.
An icon specifically enabled for this function, may be associated to the
page box when a “0” is received through the (1 bit) corresponding
Communication Object.
Same case if data received is a “1”
ACTION WHEN VALUE “0” IS RECEIVED Æ
This box should be
enabled when a users need to know when a “0” has been received
through the specific Communication Object.
ACTION WHEN VALUE “1” IS RECEIVED Æ
This box should
be enabled when a users need to know when a “1” has been received
through the specific Communication Object.
ICON Æ
Different icons can be associated to both of the (ACTION)
cases, so that users can identify what is received through the specific
Communication Object (a “0” or a “1”) (See Annexe III).
2.2.1.9. ONE BYTE INDICATOR
One byte provides much more information relating to an event than one
bit. This indicator is normally used with percentages (%) relating to
particular events (shutter position, wind speed…), however another
possible configuration option is a numerical range among 0….255.