Operation Manual

ZENNiOAVANCEYTECNOLOGÍA www.zennio.com

26
2.2.2.3. CLIMA
Air Conditioning, Thermostat and Fan Coil Control have been
unified in a unique Specific Page called “Clima”. Thus, due to the
possibility of enabling up to 4 different Climate Specific Pages, up to
4 different Climate Systems can be now controlled from the Z38.
The number of “Specific Pages” to control Climate Systems will
mainly depend on the number of different Systems to control in the
installation.
Every time a user enables a specific “Climate” page, two different
configurable fields become available:
NAME Æ
This field allow users to associate a name with the
corresponding box in the display, (11 free characters are available to set
the name).
ICON Æ
A couple of icons can be associated to the page box. (See
Annexe II).
The parameterization of the different boxes is detailed next:
BOX 1 (ON/OFF) Æ
Allow users to Turn On/Off the Climate System
connected to the KNX BUS through the display.
BOX 2 (SET TEMPERATURE) Æ
To set users preferred
temperatures.
Once this parameter is set and the System is ON, this value will be the
system temperature reference to keep.
Note:
It is REALLY IMPORTANT to notice that, any of the “Home”
or “Home II” boxes enabled as “Climate Control” with a specific
“Temperature” control type associated to any of the Climate Specific
Pages, will always update the Temperature box in the “Specific Page”,
while changes on the Temperature box in the “Specific Page” won’t
update specific boxes in the “Home” or “Home II” pages.

BOX 3 (MODE) Æ
Two different configuration options available
• Heat/Cool
- 1=Heat
- 0=Cool
• Auto/Heat/Dry/Fan/Cool
- 0=Auto
- 1=Winter