Operation Manual

ZENNiOAVANCEYTECNOLOGÍA www.zennio.com

36
Note I: When a Power BUS failure occurs, please have on mind the
delay this implies to correct it.
Note II: There are different KNX devices on the market which can
synchronize periodically the time and date of every single device in
the installation. Such devices can be really useful when the
installation is based on any kind of Schedule programming.
Note I: Disabled boxes appear “blank” in the display
BOX3(DateSetting)
To set the date in the display
To see the date in the display, users only have to press on any of
the enabled pages “header”. The date will be shown during 3
seconds.
Nota
: The day of the week does not appear on the display;
however, when programming the display, this is
automatically configured when setting the date
BOX4(DisplayContrastSetting)

The adjustment range for this function lies between 0 and 20.
The default value is 12.
BOX5(Reset)
Reset button to reinitialize the device.
RESET
SetTIME
SetDATE

Display
Contrast
Setting
ProgrammingMode