Operation Manual
ZENNiOAVANCEYTECNOLOGÍA www.zennio.com
37
2.3. INPUTS
The INZennio Z38 has 4 binary inputs for voltage-free contacts at the user’s disposal;
these inputs can be individually configured, and connected to a “push button” if
necessary.
Joining an input with the global “common” of the inputs, results in a “Closed Contact”;
the other option is an “Open Contact”.
A push button connected to an input consists of a device, which allows, or not, the
current flow while this is being pushed; in normal conditions, push buttons contacts are
always “open”.
Depending on the “Threshold Time”, we can distinguish two different actions:
¾ Short Press
¾ Long Press
Note: InZennio Z38 cannot be used neither with switches/sensors nor push buttons
(with closed contacts in normal conditions).
Note I: Once the InZennio Z38 display is parameterized via ETS, a calibration screen
will appear to delimit the Touch Zone on the display.