Operation Manual
ZENNiOAVANCEYTECNOLOGÍA www.zennio.com
38
Available configuration options for the enabled “inputs” are detailed next:
2.3.1. SHORT PRESS
Several configuration options are available for a “Short Press” on an
Input:
2.3.1.1. ONE BIT SENDING “0/1”
This function results on sending 1 bit to the BUS.
RESPONSE Æ
Depending on the function parameterization, the value
sent to the BUS will be, “0”, “1” or an alternative switching between “0
and 1”
CYCLICAL RESPONSE SENDINGÆ
This parameter allows a user
to choose the cyclically data sent, “0”, “1” or both (if the option
“Always” is selected).
PERIOD:
Defines the elapsed time between two consecutive
sendings in the “Cyclical Sending”
2.3.1.2. SHUTTER CONTROL
This function results on sending 1 bit to the BUS in order to control
shutters.
RESPONSE Æ The corresponding Control Object may be used to:
¾ Raise:
Raise the shutter. The BUS receives a “0”.
¾ Lower:
Lower the shutter. The BUS receives a “1”.
It is necessary to repeat this delimitation
process of the touch zone every time a user
makesadownloadtothescreenviaETS.