Operation Manual

ZENNiOAVANCEYTECNOLOGÍA www.zennio.com

4
1. INTRODUCTION
1.1. PRODUCT
INZennio Z38 is an LCD Touch Panel with Room Thermostat, Binary Inputs and
IR Receiver built-in. Some of its most important features are mentioned below:
¾ KNX 3.8” back-lighted monochrome Touch Panel
¾ Room Thermostat
¾ Presence Simulation
¾ Full Climate Management
¾ 12 Configurable Direct Control Functions
¾ 5 Additional Pages with up to 6 independent Functions
o Scene Control [5 Functions]
o Schedule Programming [4 Functions]
o Climate Control [5 Functions]
o Technical Alarms [6 Functions]
o Display Parameters
¾ IR Receiver buit-in (Remote Control)
¾ 4 Binary Inputs for Voltage free push buttons.
¾ No external supply required.
¾ KNX BCU included.
¾ Total Data Saving when Power Failure occurs.
The Touch Panel InZennio Z38 is organized into "Pages"; every page consists of
several "parametrizable boxes" and a "header".
Header
“HOME”PAGE
“MENU”PageShortcut
“HOMEII”Shortcut
IRReceiver
RoomThermostat
PARAMETRIZABLE
BOX