Operation Manual

ZENNiOAVANCEYTECNOLOGÍA www.zennio.com

40
¾ Increase Light:
Every press on the screen increases the
lighting level, this parameter depends on the “Dimming Step”
set, (See below).
A short press reduces the lighting level; a second press stops
the “Increase”.
¾ Reduce Light:
Reduces the lighting level with every press on
the screen, this parameter depends on the “Dimming Step” set,
(See below).
A short press reduces the lighting level; a second press stops
the “Reduction”.
¾ Increase/Reduce Light Switching:
Alternative Switching
between the orders Increase and Reduce Light level.
DIMMING STEP Æ Depending on the value selected, different
lighting levels are offered. Once selected the “DIMMER CONTROL”
option, it is necessary to set this parameter.
Dimming Step Necessary pulsations for a
complete regulation (0 – 100%)
6. 100% 1
5. 50% 2
4. 25% 4
3. 12.5% 8
2. 6.25% 16
1. 3.1% 32
0. 1.5% 64
2.3.1.4. SENDING A SCENE
This function results on sending a (1 byte) Scene Control Object to the
BUS; a scene on the BUS may be managed with the input through this
Object.
RESPONSE Æ
Choose whether the scene will be “Run” or “Saved”.
SCENE Æ
This parameter identifies the scene to Run/Save with the
corresponding Input.