Operation Manual
ZENNiOAVANCEYTECNOLOGÍA www.zennio.com
43
78 - 89 2bytes I WU
-
99.9ºC-
99,9ºC
25ºC Previous [Home X Box X] Floating Point indicator
from -99.9 to 99.9
90 - 93 1bit O T
[Clima X] On/Off control
0=Off; 1=On
94 - 97 1bit O T
[Clima X] Fan Control
0=Auto; 1=Min; 2=Med; 3=Max.
O T
[Clima X] Fan Control
0%Au;11-33%Mi;34-
66%Mid;>67%Ma
98 - 101 1bit O T
[Clima X] Blind control
1=Swing, 0=Stop/Step
SPECIFIC X
102 - 105 1bit O T
[Clima X] Moe control
0 = Cool; 1 = Heat
(CLIMA)
106 – 109 1byte O T
[Clima X] Mode Control (1 byte)
0=Auto;1=Ht;2=Dry;3=Fan;4=Cool
110 - 113 2byte O T
[Clima X] Temperature Control
Value sent to the machine
114 - 117 1bit I WU
[Clima X] On/Off indicator
0=Off; 1=On
SECTION
NUMBER
SIZE
IN/OUT
FLAGS
VALUE
NAME
DESCRIPTION
RANGE
1ª TIME
RESET
118 - 121 1byte I WU
[Clima X] Fan indicator
0=Auto;1=Ht;2=Dry;3=Fan;4=Cool
122 - 125 1byte I WU
[Clima X] blinds indicator
0=Stop; 1= Moving
126 - 129 1bit I WU
[Clima X] Mode indicator
0=Cool; 1=Heat
130 - 133 1byte I WU
[Clima X] Mode indicator (1 byte)
0=Auto;1=Ht;2=Dry;3=Fan;4=Cool
134 - 137 2byte I WU
[Clima X] Temperature indicator
Value returned by the machine
142 - 145 1bit I WT
[Clima X] Comfort
1 = Set mode; 0 = Nothing
146 - 149 1bit I WT
[Clima X] Night
2 = Set mode; 0 = Nothing
150 - 153 1bit I WT
[Clima X] Out
2 = Set mode; 0 = Nothing
138 - 141 2bytes I WT
[Clima X] External temperature sensor
0=Auto; 1=Min; 2=Med; 3=Max.
154 - 161 1bit O T
[Clima X] control variable (Heat // Cool Hysteresis )
2 Point Control
[Clima X] control variable (Heat // Cool PWM )
Proportional Integral (PWM)
THERMOSTAT
162 - 169 1byte O T
[Clima X] control variable (Heat // Cool Continuous )
Proport. Integral (Continuous)
170 - 177 1bit O T
Any Any
[Clima X] control variable (Heat // Cool additional )
Proport. Integral (Continuous)
SPECÍFIC 5
(TECHNICAL ALARMS)
178 - 183 1bit I WU
No alarm Previous
[Tech Alarms, Box X] Alarm
Trigger value (0/1) -> Alarm
184 - 189 1bit I/O WT
Any Any
[Tech Alarms, Box X] Confirm
1=Alarm Confirmed; 0=No action
190 - 193 1bit I W 0/1 0 Previous [Ex] Block
1=Input Disabled; 0=Input Free
194 - 201 1bit O WT 0/1 0 Previous [Ex] [Short. Press] "0"
Short Pr. -> Sending of "0"
[Ex] [Long Press] "0"
Short Pr. -> Sending of "0"
[Ex] [Short Press] "1"
Short Pr. -> Sending of "1"
[Ex] [Long Press] "1"
Short Pr. -> Sending of "1"
[Ex] [Short Press] Switch
Short Pr. -> Switching "0/1"
[Ex] [Long Press] Switch
Short Pr. -> Switching "0/1"
[Ex] [Short Press] Raise Shutter
Short Pr. -> Sending of 0 (Up)
[Ex] [Long Press] Raise Shutter
Short Pr. -> Sending of 0 (Up)
[Ex] [Short Press] Lower Shutter
Short Pr. -> Send. of 1 (Down)