Operation Manual

ZENNiO AVANCE Y TECNOLOGÍA
10
3. ETS PARAMETERIZATION
For starting to parameterize ZAS it is necessary, once the ETS program has been opened,
importing the data base of the product (Version 1.2 of the application program).
Next, the device is added to the project where desired. Click the right mouse button on the device
and select "Edit parameters" for starting with the configuration.
In the following sections there is a detailed explanation about each of the different functionalities of
ZAS in ETS.
3.1. DEFAULT CONFIGURATION
This section shows the default configuration from which the device parameterization starts.
The following figure shows the default communication objects: "[General] Time", to show the current
time, as well as the scenes objects "[General] Scenes. receive" and "[General] Scenes: send".
Figure 3.1. Default topology
When entering for the first time in the parameter edition of ZAS, the following screen will be shown,
with the three main sections of ZAS parameterization: General, Inputs and Buttons