Operation Manual

ZENNiO AVANCE Y TECNOLOGÍA
21
The presence simulation allows introducing the Starting time, Final time and the maximum
and minimum ON and OFF times for the presence simulation.
Note: The value established for Maximum Time (both ON and OFF) must be greater than the
value established for Minimum Time, in order not to generate a wrong parameterization that
may cause anomalous situations.
Security: The window Security allows establishing the labels and text messages that will
be shown in the display for guiding the user in the process of code change and block/unblock
of menus and buttons.
Figure 3.13. Security
Configuration: in this screen, some control can be enabled and also the name with
which they will appear in the display:
 Contrast
 Time
 Programming LED
 Touch calibration
 Reset (it will be necessary a long press, at least of 3 seconds, over the button OK to
reset the ZAS).