Operation Manual

ZENNiO AVANCE Y TECNOLOGÍA
6
2. CONFIGURATION
2.1. GENERAL CONFIGURATION
ZAS allows controlling a set of functionalities in a domotic installation in a simple and intuitive
way.
There are several parameters that reference to the general functioning of the controller, such as:
luminosity, touch blocking, initial setup, internal sensor, contrast, screensaver, information screen,
Menu screen enabling, etc.
ZAS counts on 2 opto-coupled inputs that may be individually configured as switch/sensor or
temperature probe. Depending on the selected configuration, it is necessary to connect different
external elements to the ZAS inputs: push buttons, switches or temperature probes (like the Zennio
model ZN1AC-NTC68).
The menu of the display offers several submenus, which will be explained in section "3. ETS
Parameterization":
Thermostat
Scenes
Presence simulation
Security
General configuration
Each submenu allows the access to the functionalities configured by parameter in ETS.
Within any submenu, for returning to the previous one, it is necessary to press the button Menu or
the “arrow” icon that will appear in the upper left corner of the display. See Figure 2.1.
Likewise, as well as the button Menu, a “cross” icon in the upper right corner, allows going out of the
menu directly. See Figure 2.1.