Operation Manual

ZENNiO AVANCE Y TECNOLOGÍA
8
functions. They are direct-action buttons, i.e., they will carry out the parameterized action every time
they are pressed, no matter the manu or submenu the panel is. Moreover, when these buttons are
pressed, the text message previously configured in ETS for every action will appear in the display
(see section 3.4). Each button counts on a central LED that lights during 1 second for showing that
the key-press has been correctly done.
ZAS will emit a light beep every time a button of its tactile area is pressed.
2.3. IR CONTROL
ZAS has a remote control (optional) that allows the control of the functions in the same way
that short or long press of the touch buttons.
Moreover, it counts on a series of buttons that directly activates some special functions such as
scenes, special thermostat modes, 1-bit object sending, etc.
Figure 2.2. ZAS remote control
As it can be seen in the Figure 2.2, the first row of buttons of the IR remote controller matches with
the first row of buttons of the own ZAS, both, in position and functionality. It has the keys Menu, two
keys Arrows and the key OK.
Functions associated to the buttons in the most external lateral columns match up with the rows of
buttons of the device.
Besides the described buttons that have their equivalent button in the touch panel, the remote
control counts on the following keys which directly activate special functions:
Buttons S1-S6: they activate the configured scenes for the submenu “scenes” (scenes 1-
6). Unlike ZAS, the remote control only allows executing scenes but not saving them.