Operation Manual

ZENNiO AVANCE Y TECNOLOGÍA
9
Buttons F1 and F2: they allow sending 1-bit object configurable from ETS for sending a
“0”, a “1” or switching between “0” and “1”.
Buttons Comfort, Night and Standby: they allow directly establishing the special
thermostat modes Comfort, Night and Standby. It is necessary that these modes had been
previously enabled in ETS (thermostat).
Button Switch off: a short press switches off the ZAS display. One press on the display
or pressing a key of the remote control will activate the default luminosity of the device.
When pressing a key of the remote control, besides executing the associated function, ZAS will
show the corresponding text message of that function and the LED associated to the button of the
tactile area will light. Once the message is shown, the display will automatically return to the
submenu where it was before pressing the button or to the main screen (if enabled by parameter) if
it was previously in the Menu screen, in screensaver mode or in the indicators screen (if this screen
is not enabled by parameter, the display returns to the screen where it was before receiving the
order from the remote control: screensaver, menu or submenu).