Owner`s manual

BC4500DW
GB-12
8. Use
When using a metal blade:
1. Check the bolt to fasten the blade and be sure the
bolt has on fault, and no abrasion.
2. Be sure that the blade and the holder have been
fastened according to instruction and the blade turns
smoothly without abnormal noise. The rotating parts
fastened incorrectly may cause serious accident to
the operator.
3. Cutting method:
a) Use the front left side for cutting.
b) Guide the blade from your right to left with it tilted
slightly to your left.
c) When mowing a wide area, start working from
your left end to avoid interference of cut grass.
d) The blade may be seized by weeds if the engine
speed is too low, or the blade cuts too, deep into
weeds. Adjust the engine speed and cutting depth
according to the condition of object.
For your health and to prevent the risk from
vibration, refrairr from working for a long time at
the cold temperature.
WARNING