User Manual

1. How to use
A) Dismantling of Current Starter Assembly
1. Remove the sparkplug.
2. Remove the recoil from the engine mount.
3. Fit the piston stopper (4810-96220) into sparkplug
thread. (see Fig.1)
4. Set a plier etc to pulley (1160-75210) and turn the plier to
anticlockwise. (see Fig.1)
B) Assembling of Starter Kit
1. Screw the pulley (848-ESZ-7520) on the crankshaft by
hand.
2. Set a plier etc to pulley and turn the plier to clockwise.
(see Fig.2)
[Requested tightening torque: 100kg-cm]
3. Fit the recoil (848-ESZ-7510) inserting spacer (848-8Y4-
6100) 4pcs between engine mount and starter assembly.
(see Fig.3)
[Requested tightening torque: 18kg-cm]
4. Remove the piston stopper and fix the sparkplug.
2. Composition of the starter kit
Caution !
This kit is not covered by Komatsu Zenoah warranty
policy.
Piston Stopper
Plier
Fig.1
Plier
Pulley
Fig.2
Spacer
Fig.3
STARTER KIT (GR26099)
For
G260PUM/G260PUH
G231PUM/G231PUH
848-ESZ-93A0 (505)
Head Office : 1-9 Minamidai, Kawagoe-city, Saitama, 350-1192 Japan
Phone: [phone] Fax: [phone]
No. Part Number Part Name External Appearance Q'ty
1 848-ESZ-7510 Recoil 1
2 848-ESZ-7520 Pulley 1
3 848-8Y4-6100 Spacer 4
4 0260-30420 Screw 4
5 4810-96220 Stopper 1
6 848-ESZ-93A0 Manual 1