User's Manual

Page 7
DESCRIPTION
The Pilot assembly consists of a console, a magnet, and a
transmitter. A sensor in the transmitter counts the number of
times a magnet mounted in the right crank passes the sensor.
The transmitter will then send a coded RF (radio frequency)
signal to the console containing the measured values.
The console has inboard receivers that pick up the signals
from the transmitter and from telemetry (chest strap) heart rate
signals. The heart rate is then shown in the display window. The
console will track cadence (RPMs), speed (MPH/KPH), time,
distance, and caloric expenditure.
The console and the transmitter use AA batteries as a
source of power. Install the supplied batteries in the console and
in the transmitter prior to using.
Console Battery Installation:
1. Remove the battery cover from the back of the
console.
2. Insert 2 AA batteries into the battery compartment
and reinstall the battery cover.