Meridian 400 The ROADSIDE PORTABLE GUIDE TO MOBILE COMPUTING WITH YOUR MERIDIAN 400 SUB-NOTEBOOK User’s Guide
Limitation of remedies and liabilities The vendor’s entire liability and customers’ exclusive and sole remedy for damages from any cause whatsoever (including without limitation any nonperformance, misrepresentation, or breach of warranty) shall be limited to returning the products pursuant to the thirty (30) day satisfaction guarantee, or to repair or replace specific products or services that do not comply with the limited warranty given by the vendor.
Customer Assurance Program Thirty (30) Day Money-Back Guarantee on Most Products. Any product (except for software, software disks, related documentation and consumables) purchased from our company may be returned within thirty days from the date it was shipped to the customer for a full refund of the purchase price excluding original shipping charges.
Meridian 400 One Year Limited Warranty All new Merdian 400 computer systems come with a One Year Limited Warranty which provides that the products we manufacture or assemble, other than items such as software, disks and related documentation, will remain in good working condition, free from defects in material and workmanship under normal use and service, for a period of one year from the date of shipment. This warranty is limited to the original purchaser and is not transferable.
FCC Compliance Statement For U.S. and Canadian Users Warning! Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15, Subpart B of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This page intentionally left blank.
Contents Contents Welcome! .................................................................................... 10 1. Unpacking Your System ........................................................ Do I Have Everything? ............................................................ What's in the Box? .................................................................. Let Your System Acclimate Itself ............................................. Keep the Box .....................................................
Contents How to Charge the Battery ...................................................... 37 Pre-charging a Dead Battery ............................................................... Temperature Control ........................................................................... Faulty Battery ..................................................................................... Don’t Unplug the AC Adapter with the Power On ................................. How to Use an External Video Monitor ............
Contents Parallel Port ........................................................................................ Parallel Port Mode .............................................................................. Internal Mouse .................................................................................... LCD Brightness .................................................................................. Password ...........................................................................................
Welcome! Welcome! Welcome to the Meridian User’s Guide! This guide is designed to help you get the most out of your system and keep it running trouble free, year after year. The User’s Guide is divided into seven chapters. Chapter 1, Unpacking Your System, explains how to safely open and set up your new system. Chapter 2, The Big Picture, gives an overview of a typical system including information about buttons, connectors and LED indicators.
Welcome! System Specifications lists technical details about your system. The Handy Cheat Sheet gives a short summary of some of the most needed or most forgotten commands. The Glossary gives definitions of common computer terms.
This page intentionally left blank.
Chapter 1 - Unpacking Your System 1. Unpacking Your System Obviously, the first step towards using your new Meridian is getting it safely to your door and unpacked. Do I Have Everything? The packing slip is one of the last items sealed into your system unit box. It lists everything we shipped you. As you unpack the box, check the contents against the packing slip.
Chapter 1 - Unpacking Your System What's in the Box? Your box contains the packing slip, this manual, a plastic bag full of cables and other manuals, a battery pack and AC adapter, and your Windows & DOS manual. This book shows you how to set up your system and keep it running. Your Windows for Workgroups & MS-DOS User's Guide has introductory chapters to help you install and configure DOS and Windows.
Chapter 1 - Unpacking Your System Let Your System Acclimate Itself Although your computer system can easily stand temperature extremes, it doesn’t much like rapid changes in temperature, especially going from a cold front stoop to a warm and comfy office, or from a steamy jungle mail drop to an air-conditioned villa. Rapid changes in temperature can cause condensation inside your case.
Chapter 1 - Unpacking Your System Where to Work Your Meridian 400 is a tough, rugged machine. Generally speaking it will be comfortable and run well wherever you are comfortable. Extremes of heat, cold, and humidity can be challenging to your system's parts, but usually if you can take it, so can the computer. There are, however, some things you take very easily that the computer does not like at all. Static electricity is one. Dust, water, steam, and oil are others.
Chapter 2 - The Big Picture 2. The Big Picture Your Meridian 400 is designed to give you the speed and power of a desktop system in a lightweight, portable package.
Chapter 2 - The Big Picture Top View Mouse buttons The two rectangular buttons on the front of the unit work like the two buttons of a mouse. Your right thumb can push the mouse button while another finger moves the cursor with the TruePoint pointing device. TruePoint Pointing Device The TruePoint™ pointing device works much like a joystick. The pointer moves the on-screen cursor whichever direction you tilt the red button. The harder you push, the faster the cursor moves.
Chapter 2 - The Big Picture Display latch LED Indicators Power Reset Switch TruePoint pointing device Mouse buttons Suspend/Resume button 19
Chapter 2 - The Big Picture Side View Power Button To turn the system on or off, press the power button for 1-2 seconds. When you turn the power on, the speaker beeps once (unless you have disabled the speaker by setting the volume 0). The Power Button will not work when the system is in suspend mode or when the computer is being powered by battery only and the display panel is closed. See Chapter 3, Battery and Power Management. Reset Switch The reset switch reboots the system.
Chapter 2 - The Big Picture Right Side View PCMCIA card eject button Type II PCMCIA slot Socket 1 Reset switch Left Side View Power button PCMCIA card eject button 21 Type II PCMCIA slot Socket 0 (SRAM boot socket)
Chapter 2 - The Big Picture Back View Each connector at the back of the system unit is displayed below. You can configure the parallel or serial ports from the SETUP menu. See Chapter 5, Using SETUP, for detailed instructions. Caution: Whenever you connect or disconnect cables, turn off all power switches.
Chapter 2 - The Big Picture Connector Description External floppy 26-pin connector for attaching an external 3.5” floppy drive Parallel port 25-pin parallel port for printers or other devices. Configure the parallel port from the SETUP program , Ctrl+Alt+S at the DOS prompt. Serial port 9-pin connector for a mouse, modem, or other serial devices. Configure the serial port from the SETUP program, Ctrl+Alt+S at the DOS prompt. Video 15-pin connector for external VGA monitor.
Chapter 2 - The Big Picture Inside View The indicator lights show the status of the power, battery pack and hard disk drive, CapsLock, NumLock and ScrollLock.
Chapter 2 - The Big Picture Indicator Lights Indicator Color Description Power/Suspend Glowing Blinking The power is turned on. The system is in suspend mode. LOWBAT Slow blinking The battery power level is low. If enabled in SETUP, the system beeps slowly warning you to recharge or replace the battery, or plug in the AC adapter. Fast blinking: Battery power is nearly gone. If enabled in SETUP, the system beeps quickly warning you to connect the AC adapter. Orange The battery is charging.
Chapter 2 - The Big Picture How to Use the Keyboard Escape Function keys Backspace Tab Fn key Alt Enter Ctrl Shift The keyboard is your primary means of telling the computer what to do and giving it the numbers and words to do it. The keyboard works much like the keys on a typewriter, but computer keyboards have several specialty keys. Over time, most software packages have settled on some common uses for the specialty keys. For example, in most software packages, pressing the F1 key gets help.
Chapter 2 - The Big Picture What the Keys Do Alternate (Alt) - used with other keys to perform special functions defined by the application you are using. While holding down the Alt key, press the other key. Caps Lock - toggles on and off making the typewriter letter keys appear in uppercase. Control (Ctrl) - used with other keys to perform special functions defined by the application you are using. While holding down the Ctrl key, press the other key. Delete - deletes the character at the cursor.
Chapter 2 - The Big Picture What the Keys Do Cursor Movement Keys Backspace (Bksp) - usually located above the Enter key. It may be labeled as Bksp or as an arrow pointing to the left. The Backspace key moves the cursor to the left one space erasing the characters in its path. Down Arrow - usually moves the cursor down one line. End - usually moves the cursor to the end of the line or screen. Home - usually moves the cursor to the top left side of the current page or screen.
Chapter 2 - The Big Picture How to Use the Embedded Numeric Keypad Embedded Numeric Keypad A numeric keypad for entering numbers is embedded within the main keyboard. To use the numeric characters, press the NumLock button. Keys with a number in the lower right corner will type numbers whenever NumLock is enabled. To return the keys to normal letters, press NumLock again. If you install an external keyboard or keypad, the keypad function is disabled.
Chapter 2 - The Big Picture Special Key Combinations The following key combinations let you perform special functions without exiting your application Note: Some applications may conflict with certain special key combinations. If you press key combination without results, exit the application and try again.
Chapter 3 - Battery and Power Management 3. Battery and Power Management Installing the Battery for the First Time Your system operates on a rechargeable Nickel Metal Hydride (NiMH) battery pack. To prevent possible damage during shipment the battery pack has not been installed in your system. Before turning on the system for the first time, remove the battery pack from its package and install it. Once the battery is installed, allow it to fully charge before using your system with the battery alone.
Chapter 3 - Battery and Power Management How to Install the Battery Pack To install the battery pack: 1. Insert the battery pack into the battery compartment. 2. Push the battery into the compartment until you hear a click.
Chapter 3 - Battery and Power Management How to Remove the Battery Pack Battery pack release locks 1. Locate the battery pack and battery pack release locks. 2. Slide the battery pack release locks. Releasing the battery pack locks. The battery pack will be lifted upward. 3. Pull the battery pack out of the compartment.
Chapter 3 - Battery and Power Management Turning On Your System After installing the battery pack, be sure to let the battery fully charge before using your system for the first time. The battery LED will be green when the battery is fully charged. Once the battery is fully charged, go ahead and open your system and push the power button. Hold the button down for one second to turn on the system. Note: Be sure to wait one to two seconds before pressing the power button again.
Chapter 3 - Battery and Power Management Low Battery Conditions There are two warnings when the battery in your system is low and needs charging. At the first warning, the orange battery indicator light blinks slowly, and the system speaker will beep (if enabled). The first battery warning occurs about eight minutes before the second warning. At the first warning, you should quit working and save your data, or connect the AC adapter to the system immediately. Otherwise, your data may be lost.
Chapter 3 - Battery and Power Management Extra fully charged battery available 1. Save all necessary files. 2. Exit the application. 3. Turn off the system. 4. Remove the battery pack and replace it with the fully charged battery pack. No AC adapter, power outlet or extra charged battery available 1. Save all necessary files. 2. Exit the application. 3. Turn off the system.
Chapter 3 - Battery and Power Management How to Charge the Battery To charge the battery, plug the AC adapter into the system and an electrical outlet. The AC adapter converts alternating current (AC) into direct current (DC). When the power switch is turned on, the AC adapter supplies power to the system and recharges the battery pack only when the system in the suspend mode. When the power switch is turned off, all the power from the AC adapter is dedicated to recharging the battery pack.
Chapter 3 - Battery and Power Management Faulty Battery The orange charge light indicator may flash when a faulty battery pack is installed. If the CHARGE LED flashes orange rapidly, remove the faulty battery pack immediately. Warning! Powering the system with the AC adapter and a faulty battery pack installed can damage both the AC adapter and your system.
Chapter 3 - Battery and Power Management How to Set Power Management Your system can operate in normal mode, power saving mode or suspend mode. Normal Mode The system runs at the speed specified in SETUP (Full, Slow). Power Saving Mode Power saving mode reduces power to the hard drive after several minutes of inactivity. You can set the amount of time the system should wait before powering down the hard drive.
Chapter 3 - Battery and Power Management Battery Precautions 1. Do not expose the battery to fire, which can cause explosion, or allow it to become dented or deformed. 2. Do not run your system on battery power for a long time at temperatures over 95°F (35°C). Also, do not store the battery at high temperatures. This can significantly reduce the life of the battery. 3. Temperature extremes can greatly affect the life of the battery.
Chapter 3 - Battery and Power Management AC Adapter Precautions 1. Do not subject the adapter to strong vibration or shocks. Be careful not to drop it. 2. Do not expose the adapter to direct sunlight for prolonged periods. 3. Do not use or store the adapter near chemicals or in an environment containing corrosive gases. 4. Do not use or store the adapter in places subject to extreme temperatures or near a heat-producing source. Avoid using it where it is extremely humid or dusty. 5.
This page intentionally left blank.
Chapter 4 - How to Use Your Meridian 400 4. How to Use Your Meridian 400 How to Open the System To open the display, push the latch at the front of the system backward to release the lock and lift the display carefully.
Chapter 4 - How to Use Your Meridian 400 How to use the TruePoint Pointing Device The red button, called the True Point embedded pointing device, works like a joystick. Simply put a finger on it and tilt it the direction you want the cursor on the screen to go. The harder you tilt, the faster it moves. When you need to click on something, use the rectangular mouse buttons on the front of the unit exactly as you would use the two buttons on a mouse.
Chapter 4 - How to Use Your Meridian 400 How to Use a PS/2 Style Mouse Before you can use an external mouse, you must first install its device driver. This software enables your mouse to communicate with the system. See your mouse documentation for instructions how to install the mouse and mouse driver. Your system automatically switches to a PS/2 mouse if one is connected to the Keyboard/PS/2 Mouse port. You cannot use both the embedded pointing device and the external mouse at the same time.
Chapter 4 - How to Use Your Meridian 400 How to Use Floppy Disks Floppy disks are used to: • transfer information from one computer to another • install software on your system’s hard drive • make back-up copies of your software and data When you insert a floppy disk into the system’s floppy disk drive, you can read the information stored on the disk and write information to the disk. Your can attach a 3.5-inch 1.44MB an external floppy drive. You can use either high-density (1.
Chapter 4 - How to Use Your Meridian 400 How to Care for Floppy Disks • Handle disks carefully. • Don’t remove a disk from a drive while the drive is in use. • Don’t touch or scratch any exposed portion of the disk’s shiny surface, or allow dust or moisture to collect on the disk. • Store disks at a temperature range between 10°C (50°F) and 49°C (120°F). • Keep disks away from magnetic fields. • Format a new disk before you use it for storing data.
Chapter 4 - How to Use Your Meridian 400 How to Use a PCMCIA Card Slot Caution: Don’t install another vendor’s card and socket services over the preinstalled Phoenix services. Your Card & Socket Services will accomodate SRAM cards and a modem on COM2. Your system comes with dual PCMCIA Type-II expansion slots. One slot on each side of the computer. To insert a PCMCIA card, align the card so the label is up and the connector is toward the computer. Carefully slide the card into the slot.
Chapter 4 - How to Use Your Meridian 400 PCMCIA cards (Type II) can provide your computer with: • Flash Memory • LAN • Fax/Modem • SRAM Memory • SCSI • Sound system Before you can use certain PCMCIA cards, you need to install a client driver first. See your card’s user manual for more details.
This page intentionally left blank.
Chapter 5 - Using SETUP 5. Using SETUP Your system includes a SETUP utility program that allows you to change the system configuration as needed: System time and date Floppy disk drive type Hard disk drive type Base memory Extended memory Video system Maximum CPU speed Number lock on or off Quick boot on or off PCMCIA Boot Cache Serial and parallel port status Internal Mouse LCD Brightness System Password Power saving features Note: SETUP configuration information reside in the battery powered CMOS RAM.
Chapter 5 - Using SETUP How to Run SETUP Before entering SETUP save all your files and exit your application. Once you enter SETUP, you lose all unsaved data because the system reboots when you exit SETUP. To run SETUP press Ctrl+Alt+S at the DOS prompt. Note: Do not run SETUP during system initialization. There are three SETUP screens. The first screen, “Standard System Parameters” is the first screen that appears. You should see a screen similar to the one above.
Chapter 5 - Using SETUP Navigating in SETUP You navigate through the SETUP program using cursor keys, function keys, and a few other special keys. Use the keys listed below on the SETUP screen.
Chapter 5 - Using SETUP Standard System Parameters Standard System Parameters contains the following options: Time The current time, in hours, minutes, and seconds. The system uses a 24-hour clock format; for example, 5:50 pm displays as 17:50:00. Date The current date in month/day/year format. Diskette Drive A Set to a 1.44 MB 3.5-inch floppy disk drive when it is installed in your system. Hard Disk 1 Set to the fixed (hard) disk drive type installed in your system.
Chapter 5 - Using SETUP Video Card Always set to “VGA/EGA”. Maximum CPU Speed Use the Maximum CPU Speed feature to select between Full Speed, and Slow Speed. Slow Speed reduces the speed of the CPU to be compatible with some software which cannot be used at the faster operating speed. Slow Speed also extends battery life. Normally this setting should be left at “Full Speed”. Numlock on at boot Use the Numlock on at boot feature to activate the numeric keypad on the computer’s keyboard at bootup.
Chapter 5 - Using SETUP System Configuration Parameters To display the System Configuration menu, press PageUP or PageDown from the main SETUP screen. Cache Use of 8KB or 16KB of cache memory can improve your computer’s processing speed. Some applications and diagnostic utilities do not run properly with the cache on.
Chapter 5 - Using SETUP Serial Port 1 Sets the COM port used for the RS-232C serial port. Defaults: Name: COM1. I/O address: 03F8h. IRQ: 4. Parallel Port Sets the Name, I/O address, and IRQ for LPT1, LPT2 and LPT3 parallel ports. Defaults: Name: LPT1. I/O address: 0378h. IRQ: 7. Parallel Port Mode Sets the parallel port for unidirectional or bidirectional data flow. (Default: Bidirectional) Note: Should you use the port as Enhanced Parallel Port (EPP), set to “Bidirectional.
Chapter 5 - Using SETUP Power Management Parameters The Power Management Feature Control menu customizes the system’s battery conservation programs, allowing for the most efficient operation. To view the Power Management Setup menu from the DOS prompt, press Ctrl+Alt+P simultaneously. Note: Windows NT version 3.1 does not support power management. If you are running Windows NT version 3.1 with this system, disable all power management.
Chapter 5 - Using SETUP Power Management This option enables or disables all power management functions. You can choose between Enable, Disable, or Battery only. When Enabled, the setup items listed under Power Management Parameters will take effect. When Disabled, the setup items listed under Power Management Parameters will not take effect. When set to Battery Only and the system is being powered by battery only, Power Management will be on.
Chapter 5 - Using SETUP Idle, Standby, and Suspend Options The Setup items listed under Power Management Feature Control let you minimize power consumption and maximize battery life. Use these Setup options to get the maximum use out of every battery charge. System Idle After System Idle is the first level of power management. When System Idle is enabled, the system slows down only the CPU after the allotted time has passed.
Chapter 5 - Using SETUP System Suspend After System Suspend After is the third level of power conservation, providing the maximum power conservation. When System Suspend is enabled, the system turns off the LCD backlight as well as the diskette and hard disk drives and also turns off the CPU after the allotted time has passed. Data currently in RAM is safe until normal operation is resumed. The suspend state timeout interval can be disabled or set to preset values between 5 minutes and 60 minutes.
Chapter 5 - Using SETUP Ring on Resume Use the Ring on Resume feature to determine whether the system automatically wakes up from Suspend mode upon receiving an incoming modem ring from a serial or PCMCIA modem. Low Battery Suspend Use this feature to automatically enter the suspend mode when the battery charge is critically low. If you disable this feature, normal battery low alarms will occur, but the system will not enter suspend mode unless you push the suspend/resume button.
Chapter 5 - Using SETUP System Security You can set both a system password and a key lock password to prevent unauthorized use of your system. System Password Warning! If you forget the password, your system will not operate. You will have to contact Customer Service to completely clear the CMOS password. Write down your password and store it in a safe place. To set the system password, run the SETUP program and select Password: on the menu screen.
Chapter 5 - Using SETUP 2. Type the password you want use and press Enter. It can be up to seven characters in length. The following verification prompt appears.
Chapter 5 - Using SETUP 3. Type your password and press Enter again. The following alert message appears. 4. Press any key to return to main menu. 5. Press ESC, then F4 to save the password. For security's sake, the password characters don't appear on the screen as you type them.
Chapter 5 - Using SETUP Removing and Changing a System Password To remove or change the system password: 1. Start your system, then wait for the password prompt. 2. Enter your current password at the prompt followed by a forward slash (/). At this point, if you wish to remove the password, just press the Enter key. To set a new password, type it in, then press the Enter key.
Chapter 6 - How to Install Options 6. How to Install Options Right out of the box, your Meridian helps you do your work faster and easier. And as your needs change, it's easy to add new components to improve the performance, power, and flexibility of your system. This section explains how to install some of the most popular computer accessories. Usually, beefing up your system is as easy as opening the case and sliding in a new feature.
Chapter 6 - How to Install Options How to Install More RAM Memory System memory is often called RAM or Random Access Memory. RAM is the thinking space available to your applications. Usually, the more system RAM you have, the faster your system will run. Many software applications simply run much faster and more efficiently when more RAM is available. Your system comes with 4 MB of RAM installed, upgradable to 8 MB or 20 MB. Additional memory is installed with a 4 MB or 16 MB RAM module.
Chapter 6 - How to Install Options Installing the RAM Board RAM Board The RAM board slot is located under the memory board cover, as illustrated in the figure. 1. Turn off the power and remove all connecting cables. 2. As you face the computer, turn the system over so the bottom of the system is facing up. 3. Use a small, thin screw driver or other tool to free the cover. Be careful not to break the cover or the system unit case. Take the cover off and set it aside. 4.
Chapter 6 - How to Install Options How to Attach an External Floppy Drive You can use an optional external 3.5-inch floppy disk drive by connecting it to the external floppy drive port on the back of your system. Caution: Always locate the drive at the place with good ventilation. Keep the drive away from strong magnetic fields. Do not insert liquids or corrosive chemicals into the drive. To connect the drive: 1. Turn off your computer and peripherals. 2.
Chapter 6 - How to Install Options Floppy disk slot Disk release button 71
This page intentionally left blank.
Chapter 7 - How to Maintain Your System 7. How to Maintain Your System Your system is designed for years of rugged, portable use. You’ll get even more service out of your Meridian by taking good care of your equipment. Traveling with the System Follow these steps to prepare the system for travel: 1. Back up important data onto floppy disks. 2. Turn off the power to the system and all peripherals. 3. Make sure that the display is properly closed. The latch on the system must be secured. 4.
Chapter 7 - How to Maintain Your System Caring for the System Hardware • Do not expose the system to rain, liquid, or moisture. • Do not clean the system with liquid or aerosol cleaners. Wipe the system with a damp, soft cloth. • Do not place the system near sources of heat. • Do not expose the system to extreme temperatures. • Do not place objects on top of the system. This can damage the screen. • Do not expose the system to direct sunlight. • Do not subject the system to strong vibration or shocks.
Chapter 7 - How to Maintain Your System Caring for the AC Adapter • Do not connect to any other device. • Connect the adapter power cord into a grounded power outlet only. • Contact an electrician if the adapter power cord does not fit into your outlet. • Do not set anything on the power cord. Carefully route the power cord and cables. Caring for the Battery Power Pack • Turn the power off before removing or replacing the battery pack. • Do not remove a battery while charging.
System Specifications System Specifications CPU Intel i486SX/33MHz, i486DX2/50MHz or i486DX4/100MHz (all SL enhanced) CPU Internal Cache 8KB; 16KB for i486DX4/100 Memory ROM: 128KB for system/video RAM: 4MB standard expandable to 8MB or 20MB Video: 1MB Hard drive 2.5 inch low power consumption IDE hard drive with 175MB, 262MB, or 350MB capacity Display dimensions STN mono - 8.2 inch diagonal STN color - 7.8 inch diagonal TFT color - 7.
System Specifications Dimensions Weight STN Monochrome: STNColor: TFT Color: 3.6 lbs with battery 3.9 lbs with battery 4.1 lbs with battery Case STN/TFT color: 10.2(w) X 7.8(d) X 1.7(h) inch 259(w) X 198(d) X 42(h) mm Case STN mono: 10.2(w) X 7.8(d) X 1.5(h) inch 259(w) X 198(d) X 37(h) mm Battery Pack Specifications Type 6-cell rechargeable nickel-metal hydride Voltage 7.2V DC Capacity 2600 mAh Storage temperature -10° to 40° C short term -10° to 30° C long term Dimensions 5.5(w) X 2.
Handy Cheat Sheet Handy Cheat Sheet Here are some of the most often needed or forgotten notes. CTRL-ALT-DEL .......................................................... Warm Reboot Reset button, or Power button ................................................................... Cold Reboot F2 during power up ..................................................... Access SETUP CTRL-BREAK, or CTRL-C............................
Handy Cheat Sheet Handy Cheat Sheet Windows Shortcuts Ctrl-C ....................................................................... copy to clipboard Ctrl-V ................................................paste or copy from the clipboard Ctrl-X ...................................................... delete and copy to clipboard Alt-Tab ............................................ toggle between open applications Alt-Esc ..................................................
Glossary Glossary This glossary provides general definitions of key terms. For an expanded list look in standard reference books on computers. Address (Physical) - A specific location in memory where a unit record, or sector, of data is stored. Application Program - Computer program that actually performs a useful task. Word processors, spreadsheets, and desktop publishing programs are application programs. AUTOEXEC.
Glossary Glossary Kilobyte (KB) - A unit used to measure storage space (in a computer’s memory or on a disk). One kilobyte equals 1024 bytes. LED - Light Emitting Diode. A substance that illuminates when electricity passes through it, like the indicator lights on the front panel of the computer. Local Bus - A set of addresses, data, and control signals that interface directly with the host CPU. Mainboard - A printed circuit board into which other circuit boards can be plugged.
Index Index A M AC Adapter Memory precautions 41 how to install 68 Mouse B how to use 45 Battery how to charge 37 how to install 32 how to remove 33 life 34 precautions 40 C Mouse Buttons 18 N Numeric Keypad 29 O Options Charging the battery 37 Condensation 15 Connectors 23 how to install 67 P D Packing Slip 13 PCMCIA Slot 48 DOS Commands 79 DOS File Extensions 79 Power Button 20 Power Management F Power Saving 39 eject buttons 20 parameters 58 Features, system 17 Floppy Disks 46 F
Index Index Suspend Mode 39 Suspend/Resume Button 18 System features 17 how to maintain 73 how to open 43 specifications 77 System Security 63 T TruePoint device 18, 44 U Unpacking 13 W Where to set up 16 700-0187-01 Merid400 83
Late Changes The following changes arrived too late for printing: There are no corrections at this time.
