SDS

SAFETY DATA SHEET
ZEP MULTI SURFACE FLR CLNR CON 32 OZ
Version 1.0
Revision Date 03/16/2017
Print Date 12/12/2017
4 / 10
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the
application area.
Provide sufficient air exchange and/or exhaust in work rooms.
Dispose of rinse water in accordance with local and national
regulations.
Conditions for safe storage
:
No smoking.
Keep in a well-ventilated place.
Observe label precautions.
Electrical installations / working materials must comply with
the technological safety standards.
Materials to avoid
:
Do not store near acids.
Oxidizing agents
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
Components
CAS-No.
Value type
(Form of
exposure)
Control
parameters /
Permissible
concentration
Basis
2-(2-butoxyethoxy)ethanol
112-34-5
TWA
(Inhalable
fraction and
vapor)
10 ppm
ACGIH
Engineering measures
:
effective ventilation in all processing areas
Personal protective equipment
Respiratory protection
:
Use respiratory protection unless adequate local exhaust
ventilation is provided or exposure assessment demonstrates
that exposures are within recommended exposure guidelines.
Hand protection
Material
:
Protective gloves
Remarks
:
The suitability for a specific workplace should be discussed
with the producers of the protective gloves.
Eye protection
:
Ensure that eyewash stations and safety showers are close to
the workstation location.
Tightly fitting safety goggles
Skin and body protection
:
Impervious clothing
Choose body protection according to the amount and
concentration of the dangerous substance at the work place.
Hygiene measures
:
When using do not eat or drink.
When using do not smoke.
Wash hands before breaks and at the end of workday.