SDS

SAFETY DATA SHEET
ZEP FOAMING WALL CLEANER 4 PACK
Version 4.0
Revision Date 05/02/2018
Print Date 09/17/2018
4 / 11
regulations.
Always replace cap after use.
Do not breathe vapours or spray mist.
Conditions for safe storage
:
BEWARE: Aerosol is pressurized. Keep away from direct sun
exposure and temperatures over 50 °C. Do not open by force
or throw into fire even after use. Do not spray on flames or
red-hot objects.
No smoking.
Observe label precautions.
Electrical installations / working materials must comply with
the technological safety standards.
Keep in a dry, cool and well-ventilated place.
Materials to avoid
:
Do not store near acids.
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
Components
CAS-No.
Value type
(Form of
exposure)
Control
parameters /
Permissible
concentration
Basis
butane
106-97-8
TWA
800 ppm
1,900 mg/m3
NIOSH REL
TWA
800 ppm
1,900 mg/m3
OSHA P0
PEL
800 ppm
1,900 mg/m3
CAL PEL
2-(2-butoxyethoxy)ethanol
112-34-5
TWA
(Inhalable
fraction and
vapor)
10 ppm
ACGIH
propane
74-98-6
TWA
1,000 ppm
ACGIH
TWA
1,000 ppm
1,800 mg/m3
NIOSH REL
TWA
1,000 ppm
1,800 mg/m3
OSHA Z-1
TWA
1,000 ppm
1,800 mg/m3
OSHA P0
PEL
1,000 ppm
1,800 mg/m3
CAL PEL
Engineering measures
:
effective ventilation in all processing areas
Personal protective equipment
Respiratory protection
:
Use respiratory protection unless adequate local exhaust
ventilation is provided or exposure assessment demonstrates
that exposures are within recommended exposure guidelines.
Hand protection
Remarks
:
The suitability for a specific workplace should be discussed
with the producers of the protective gloves.