SDS

SAFETY DATA SHEET
ZEP LUXURY VINYL CERAMIC & PORCELAIN TLE
Version 1.0
Revision Date 04/23/2019
Print Date 10/10/2019
3 / 9
Further information
:
Collect contaminated fire extinguishing water separately. This
must not be discharged into drains.
Fire residues and contaminated fire extinguishing water must
be disposed of in accordance with local regulations.
Special protective equipment
for firefighters
:
Wear self-contained breathing apparatus for firefighting if
necessary.
SECTION 6. ACCIDENTAL RELEASE MEASURES
Personal precautions,
protective equipment and
emergency procedures
:
Ensure adequate ventilation.
Refer to protective measures listed in sections 7 and 8.
Environmental precautions
:
Prevent product from entering drains.
Prevent further leakage or spillage if safe to do so.
If the product contaminates rivers and lakes or drains inform
respective authorities.
Methods and materials for
containment and cleaning up
:
Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).
Sweep up or vacuum up spillage and collect in suitable
container for disposal.
SECTION 7. HANDLING AND STORAGE
Advice on safe handling
:
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the
application area.
Conditions for safe storage
:
Electrical installations / working materials must comply with
the technological safety standards.
Materials to avoid
:
No materials to be especially mentioned.
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
Components
CAS-No.
Value type
(Form of
exposure)
Control
parameters /
Permissible
concentration
Basis
2-(2-butoxyethoxy)ethanol
112-34-5
TWA
(Inhalable
fraction and
vapor)
10 ppm
ACGIH
Engineering measures
:
effective ventilation in all processing areas
Personal protective equipment
Respiratory protection
:
Use respiratory protection unless adequate local exhaust