MSDS

SAFETY DATA SHEET
ZEP MOLD & MILD STN RMVR
Version 1.1
Revision Date 04/10/2015
Print Date 04/13/2015
4 / 10
SECTION 6. ACCIDENTAL RELEASE MEASURES
Personal precautions,
protective equipment and
emergency procedures
:
Use personal protective equipment.
Environmental precautions
:
Prevent product from entering drains.
Prevent further leakage or spillage if safe to do so.
If the product contaminates rivers and lakes or drains inform
respective authorities.
Methods and materials for
containment and cleaning up
:
Neutralise with acid.
Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).
Keep in suitable, closed containers for disposal.
SECTION 7. HANDLING AND STORAGE
Advice on safe handling
:
Do not breathe vapours/dust.
Avoid contact with skin and eyes.
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the
application area.
To avoid spills during handling keep bottle on a metal tray.
Dispose of rinse water in accordance with local and national
regulations.
Conditions for safe storage
:
Keep container tightly closed in a dry and well-ventilated
place.
Containers which are opened must be carefully resealed and
kept upright to prevent leakage.
Observe label precautions.
Electrical installations / working materials must comply with
the technological safety standards.
Materials to avoid
:
Do not store near acids.
Oxidizing agents
Keep away from metals.
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
Components
CAS-No.
Value type
(Form of
exposure)
Control
parameters /
Permissible
concentration
Basis
sodium hypochlorite
7681-52-9
STEL
2 mg/m3
US WEEL
Personal protective equipment
Respiratory protection
:
In case of insufficient ventilation, wear suitable respiratory
equipment.