SDS

SAFETY DATA SHEET
ZEP MOLD STAIN AND MILDEW STAIN REMOVER
Version 2.1 Revision Date 02/05/2018 Print Date 07/18/2018
8 / 11
Regulation 40 CFR Protection of Environment; Part 82 Protection of
Stratospheric Ozone - CAA Section 602 Class I
Substances
Remarks This product neither contains, nor was manufactured
with a Class I or Class II ODS as defined by the U.S.
Clean Air Act Section 602 (40 CFR 82, Subpt. A, App.A
+ B).
Additional ecological
information
: An environmental hazard cannot be excluded in the
event of unprofessional handling or disposal., Toxic to
aquatic life with long lasting effects.
SECTION 13. DISPOSAL CONSIDERATIONS
Disposal methods
Waste from residues : The product should not be allowed to enter drains, water
courses or the soil.
Do not contaminate ponds, waterways or ditches with
chemical or used container.
Dispose of in accordance with local regulations.
Contaminated packaging : Empty remaining contents.
Dispose of as unused product.
Do not re-use empty containers.
SECTION 14. TRANSPORT INFORMATION
Transportation Regulation: 49 CFR (USA):
UN1791, Hypochlorite solutions, 8, III - Limited quantity
Transportation Regulation: IMDG (Vessel):
UN1791, HYPOCHLORITE SOLUTION, 8, III - Limited quantity
Transportation Regulation: IATA (Cargo Air):
UN1791, Hypochlorite solution, 8, III
Transportation Regulation: IATA (Passenger Air):
UN1791, Hypochlorite solution, 8, III
Transportation Regulation: TDG (Canada):
UN1791, HYPOCHLORITE SOLUTION, 8, III - Limited quantity
The product as delivered to the customer conforms to packaging requirements for shipment by road
under US Department of Transportation (DOT) regulations. Additional transportation classifications
noted above are for reference only, and not a certification or warranty of the suitability of the packaging
for shipment under these alternative transport regulations.