SDS

SAFETY DATA SHEET
ZEP MULTI SURFACE FLOOR Z
Version 3.2
Revision Date 02/05/2018
Print Date 09/17/2018
3 / 9
for firefighters
necessary.
SECTION 6. ACCIDENTAL RELEASE MEASURES
Personal precautions,
protective equipment and
emergency procedures
:
Ensure adequate ventilation.
Evacuate personnel to safe areas.
Use personal protective equipment.
Environmental precautions
:
Prevent product from entering drains.
Prevent further leakage or spillage if safe to do so.
If the product contaminates rivers and lakes or drains inform
respective authorities.
Methods and materials for
containment and cleaning up
:
Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).
Keep in suitable, closed containers for disposal.
SECTION 7. HANDLING AND STORAGE
Advice on safe handling
:
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the
application area.
Conditions for safe storage
:
Electrical installations / working materials must comply with
the technological safety standards.
Materials to avoid
:
No materials to be especially mentioned.
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
Components
CAS-No.
Value type
(Form of
exposure)
Control
parameters /
Permissible
concentration
Basis
2-(2-butoxyethoxy)ethanol
112-34-5
TWA
(Inhalable
fraction and
vapor)
10 ppm
ACGIH
Engineering measures
:
Not applicable
Personal protective equipment
Respiratory protection
:
In case of insufficient ventilation, wear suitable respiratory
equipment.
Hand protection
Remarks
:
The suitability for a specific workplace should be discussed
with the producers of the protective gloves.